★아직 평가 없음

M-410iB

Industrial-RobotJapanJapan단종
M-410iB
비교
산업:
창고·물류제조Food and beverage, building materials, chemicals
용도:
자재 취급팔레타이징Box, bag and layer palletizingdepalletizing
가격:
미공개

설명

M-410iB은(는) FANUC의 Industrial-Robot입니다. 자재 취급, 팔레타이징, Box, bag and layer palletizing 용도로 설계되었습니다. 주요 수치: 가반 하중 700 kg, 도달 범위 3143 mm, 4 자유도.

The FANUC M-410iB is FANUC's former series of dedicated palletizing robots, sold in five sizes: the high-speed /140H (140 kg) and /160 (160 kg), the heavy-payload /300 (300 kg) and /450 (450 kg), and the super-heavy /700 (700 kg). It has since been replaced by the M-410iC and M-410iD. The /160, /300, /450 and /700 are floor-mounted 4-axis arms reaching 3.13-3.14 m and repeating to 0.5 mm, with a parallel-link arm that keeps the tool flange level. Throughput, measured with the maximum payload over a 2,000 mm horizontal and 400 mm vertical move, runs from 1,500 cycles an hour for the /160 to 1,000 for the /300 and 700 for the /450 and /700; including the 120 kg controller they weigh 1,940 kg (/160, /300), 2,430 kg (/450) and 2,700 kg (/700). The /140H is a lighter 5-axis variant (2.85 m reach, 0.2 mm repeatability, 1,200 kg) with a wrist that tilts up to 20 degrees, rated at 1,900 cycles an hour with a 45 kg load. All run off AC servo drives in 0-45 C plants, come iRVision ready for height detection, part sorting, inspection and depalletizing, and are programmed and simulated offline in ROBOGUIDE. Sargento Foods' Plymouth, Wisconsin cheese plant runs eight M-410iB cells, integrated by Intelligrated, each palletizing from up to three production lanes with a vacuum plenum end-of-arm tool.

주요 기능

  • Five variants: /140H (140 kg), /160 (160 kg), /300 (300 kg), /450 (450 kg), /700 (700 kg)
  • 4-axis on /160, /300, /450, /700
  • 5-axis on /140H
  • Reach 3.14 m (/160, /300, /700), 3.13 m (/450), 2.85 m (/140H)
  • Repeatability 0.5 mm (4-axis), 0.2 mm (/140H)
  • Throughput 1,900 (/140H), 1,500 (/160), 1,000 (/300), 700 (/450, /700) cycles/hour
  • Mass incl. controller: 1,940 kg (/160, /300), 2,430 kg (/450), 2,700 kg (/700)
  • /140H 1,200 kg without controller
  • Floor mounting
  • Electric servo drive by AC servo motors
  • iRVision ready: height detection, part sorting, visual inspection, depalletizing
  • ROBOGUIDE offline programming, palletizing pattern creation and motion optimization
  • Ambient 0-45 C, vibration 0.5 G or less

기술 사양

물리 사양
가반하중700 kg
도달거리3.14 m
반복 정밀도±0.5 mm
이동성
이동 방식고정형
자유도4
작동 환경Industrial palletizing cells: 0-45 C, 75% RH normally (95% short term, no dew or frost), vibration 0.5 G or less, 0°C to 45°C
액추에이터Electric servo drive by AC servo motor
센싱 & 컴퓨팅
소프트웨어 / AIiRVision ready; ROBOGUIDE offline programming and simulation (PalletPRO-style pattern creation)
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the M-410iB?

The FANUC M-410iB is FANUC's former series of dedicated palletizing robots, sold in five sizes: the high-speed /140H (140 kg) and /160 (160 kg), the heavy-payload /300 (300 kg) and /450 (450 kg), and the super-heavy /700 (700 kg). It has since been replaced by the M-410iC and M-410iD.

Who makes the M-410iB?

The M-410iB is made by FANUC, a robotics company based in Japan.

How much does the M-410iB cost?

FANUC has not publicly announced pricing for the M-410iB. You can enquire through RobotAIGeek for current pricing.

What is the M-410iB used for?

The M-410iB is designed for 자재 취급, 팔레타이징, box, bag and layer palletizing, and depalletizing. It is used in 창고·물류, 제조, and food and beverage, building materials, chemicals settings.

What is the payload capacity of the M-410iB?

The M-410iB has a payload capacity of 700 kg and a reach of 3.14 m.

How many degrees of freedom does the M-410iB have?

The M-410iB has 4 degrees of freedom.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

M-410iB 대체 로봇 →

운영 조직

이 로봇을 운영 중이거나, 운영했거나, 시범 도입한 조직 — 도입 기록 기준.

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?