RobotAIGeek
★評価はまだありません

M-410iB

Industrial-RobotJapanJapan販売終了
M-410iB
比較
情報源:
産業:
倉庫・物流製造Food and beverage, building materials, chemicals
用途:
マテリアルハンドリングパレタイジングBox, bag and layer palletizingdepalletizing
価格:
未発表

説明

M-410iBはFANUCのIndustrial-Robotです。 マテリアルハンドリング、パレタイジング、Box, bag and layer palletizing向けに設計されています。 主な数値:可搬質量 700 kg、リーチ 3143 mm、4 自由度。

The FANUC M-410iB is FANUC's former series of dedicated palletizing robots, sold in five sizes: the high-speed /140H (140 kg) and /160 (160 kg), the heavy-payload /300 (300 kg) and /450 (450 kg), and the super-heavy /700 (700 kg). It has since been replaced by the M-410iC and M-410iD. The /160, /300, /450 and /700 are floor-mounted 4-axis arms reaching 3.13-3.14 m and repeating to 0.5 mm, with a parallel-link arm that keeps the tool flange level. Throughput, measured with the maximum payload over a 2,000 mm horizontal and 400 mm vertical move, runs from 1,500 cycles an hour for the /160 to 1,000 for the /300 and 700 for the /450 and /700; including the 120 kg controller they weigh 1,940 kg (/160, /300), 2,430 kg (/450) and 2,700 kg (/700). The /140H is a lighter 5-axis variant (2.85 m reach, 0.2 mm repeatability, 1,200 kg) with a wrist that tilts up to 20 degrees, rated at 1,900 cycles an hour with a 45 kg load. All run off AC servo drives in 0-45 C plants, come iRVision ready for height detection, part sorting, inspection and depalletizing, and are programmed and simulated offline in ROBOGUIDE. Sargento Foods' Plymouth, Wisconsin cheese plant runs eight M-410iB cells, integrated by Intelligrated, each palletizing from up to three production lanes with a vacuum plenum end-of-arm tool.

特長

  • Five variants: /140H (140 kg), /160 (160 kg), /300 (300 kg), /450 (450 kg), /700 (700 kg)
  • 4-axis on /160, /300, /450, /700
  • 5-axis on /140H
  • Reach 3.14 m (/160, /300, /700), 3.13 m (/450), 2.85 m (/140H)
  • Repeatability 0.5 mm (4-axis), 0.2 mm (/140H)
  • Throughput 1,900 (/140H), 1,500 (/160), 1,000 (/300), 700 (/450, /700) cycles/hour
  • Mass incl. controller: 1,940 kg (/160, /300), 2,430 kg (/450), 2,700 kg (/700)
  • /140H 1,200 kg without controller
  • Floor mounting
  • Electric servo drive by AC servo motors
  • iRVision ready: height detection, part sorting, visual inspection, depalletizing
  • ROBOGUIDE offline programming, palletizing pattern creation and motion optimization
  • Ambient 0-45 C, vibration 0.5 G or less

技術仕様

本体
可搬重量700 kg
リーチ3.14 m
繰り返し精度±0.5 mm
移動性能
移動方式固定型
自由度4
使用環境Industrial palletizing cells: 0-45 C, 75% RH normally (95% short term, no dew or frost), vibration 0.5 G or less, 0°C to 45°C
アクチュエーターElectric servo drive by AC servo motor
センシング・演算
ソフトウェア / AIiRVision ready; ROBOGUIDE offline programming and simulation (PalletPRO-style pattern creation)
メーカー情報第三者情報情報源なし情報源のステータスは、このロボットに登録された情報源に基づきます。

ロボットフォーラム

フォーラムを読み込み中...

よくある質問

What is the M-410iB?

The FANUC M-410iB is FANUC's former series of dedicated palletizing robots, sold in five sizes: the high-speed /140H (140 kg) and /160 (160 kg), the heavy-payload /300 (300 kg) and /450 (450 kg), and the super-heavy /700 (700 kg). It has since been replaced by the M-410iC and M-410iD.

Who makes the M-410iB?

The M-410iB is made by FANUC, a robotics company based in Japan.

How much does the M-410iB cost?

FANUC has not publicly announced pricing for the M-410iB. You can enquire through RobotAIGeek for current pricing.

What is the M-410iB used for?

The M-410iB is designed for マテリアルハンドリング, パレタイジング, box, bag and layer palletizing, and depalletizing. It is used in 倉庫・物流, 製造, and food and beverage, building materials, chemicals settings.

What is the payload capacity of the M-410iB?

The M-410iB has a payload capacity of 700 kg and a reach of 3.14 m.

How many degrees of freedom does the M-410iB have?

The M-410iB has 4 degrees of freedom.

類似ロボットと比較

このロボットが最も近い代替候補とどう比べられるかをご覧ください

M-410iB の代替候補 →

導入している組織

このロボットを運用中・運用していた・試験導入した組織(導入記録より)。

関連ロボット

もっと見る >

最新ロボット情報を毎週ニュースレターで受け取りませんか?