RobotAIGeek
★Noch nicht bewertet

M-410iB

Industrial-RobotJapanJapanEingestellt
M-410iB
Vergleichen
Branchen:
Lager & LogistikFertigungFood and beverage, building materials, chemicals
Anwendungen:
MaterialhandhabungPalettierenBox, bag and layer palletizingdepalletizing
Preis:
Nicht angekündigt

BESCHREIBUNG

M-410iB ist ein Industrial-Robot von FANUC. Er ist für Materialhandhabung, Palettieren, Box, bag and layer palletizing ausgelegt. Eckdaten: 700 kg Traglast, 3143 mm Reichweite, 4 Freiheitsgrade.

The FANUC M-410iB is FANUC's former series of dedicated palletizing robots, sold in five sizes: the high-speed /140H (140 kg) and /160 (160 kg), the heavy-payload /300 (300 kg) and /450 (450 kg), and the super-heavy /700 (700 kg). It has since been replaced by the M-410iC and M-410iD. The /160, /300, /450 and /700 are floor-mounted 4-axis arms reaching 3.13-3.14 m and repeating to 0.5 mm, with a parallel-link arm that keeps the tool flange level. Throughput, measured with the maximum payload over a 2,000 mm horizontal and 400 mm vertical move, runs from 1,500 cycles an hour for the /160 to 1,000 for the /300 and 700 for the /450 and /700; including the 120 kg controller they weigh 1,940 kg (/160, /300), 2,430 kg (/450) and 2,700 kg (/700). The /140H is a lighter 5-axis variant (2.85 m reach, 0.2 mm repeatability, 1,200 kg) with a wrist that tilts up to 20 degrees, rated at 1,900 cycles an hour with a 45 kg load. All run off AC servo drives in 0-45 C plants, come iRVision ready for height detection, part sorting, inspection and depalletizing, and are programmed and simulated offline in ROBOGUIDE. Sargento Foods' Plymouth, Wisconsin cheese plant runs eight M-410iB cells, integrated by Intelligrated, each palletizing from up to three production lanes with a vacuum plenum end-of-arm tool.

FUNKTIONEN

  • Five variants: /140H (140 kg), /160 (160 kg), /300 (300 kg), /450 (450 kg), /700 (700 kg)
  • 4-axis on /160, /300, /450, /700
  • 5-axis on /140H
  • Reach 3.14 m (/160, /300, /700), 3.13 m (/450), 2.85 m (/140H)
  • Repeatability 0.5 mm (4-axis), 0.2 mm (/140H)
  • Throughput 1,900 (/140H), 1,500 (/160), 1,000 (/300), 700 (/450, /700) cycles/hour
  • Mass incl. controller: 1,940 kg (/160, /300), 2,430 kg (/450), 2,700 kg (/700)
  • /140H 1,200 kg without controller
  • Floor mounting
  • Electric servo drive by AC servo motors
  • iRVision ready: height detection, part sorting, visual inspection, depalletizing
  • ROBOGUIDE offline programming, palletizing pattern creation and motion optimization
  • Ambient 0-45 C, vibration 0.5 G or less

TECHNISCHE DATEN

Physisch
Traglast700 kg
Reichweite3.14 m
Wiederholgenauigkeit±0.5 mm
Mobilität
BewegungsartStationär
Freiheitsgrade4
EinsatzumgebungIndustrial palletizing cells: 0-45 C, 75% RH normally (95% short term, no dew or frost), vibration 0.5 G or less, 0°C to 45°C
AktorenElectric servo drive by AC servo motor
Sensorik & Rechenleistung
Software / KIiRVision ready; ROBOGUIDE offline programming and simulation (PalletPRO-style pattern creation)
HerstellerangabeDrittquelleOhne QuelleDer Quellenstatus basiert auf den angegebenen Quellen dieses Roboters.

ROBOTER-FOREN

Foren werden geladen...

HÄUFIG GESTELLTE FRAGEN

What is the M-410iB?

The FANUC M-410iB is FANUC's former series of dedicated palletizing robots, sold in five sizes: the high-speed /140H (140 kg) and /160 (160 kg), the heavy-payload /300 (300 kg) and /450 (450 kg), and the super-heavy /700 (700 kg). It has since been replaced by the M-410iC and M-410iD.

Who makes the M-410iB?

The M-410iB is made by FANUC, a robotics company based in Japan.

How much does the M-410iB cost?

FANUC has not publicly announced pricing for the M-410iB. You can enquire through RobotAIGeek for current pricing.

What is the M-410iB used for?

The M-410iB is designed for materialhandhabung, palettieren, box, bag and layer palletizing, and depalletizing. It is used in lager & logistik, fertigung, and food and beverage, building materials, chemicals settings.

What is the payload capacity of the M-410iB?

The M-410iB has a payload capacity of 700 kg and a reach of 3.14 m.

How many degrees of freedom does the M-410iB have?

The M-410iB has 4 degrees of freedom.

MIT ÄHNLICHEN ROBOTERN VERGLEICHEN

Sehen Sie, wie sich dieser Roboter gegenüber seinen nächsten Alternativen schlägt

Alternativen zu M-410iB →

Betrieben von

Organisationen, die diesen Roboter betreiben, betrieben oder getestet haben – laut Einsatznachweisen.

ÄHNLICHE ROBOTER

MEHR ANZEIGEN >

WÖCHENTLICHE NEWS ZU DEN NEUESTEN ROBOTER-UPDATES ERHALTEN?