설명
Aerones Wind Turbine Blade Maintenance Robot은(는) Aerones의 Industrial-Robot입니다. 청소, 코팅, 도장 용도로 설계되었습니다. 주요 수치: 2023년 출시.
Aerones' modular robotic system services wind turbine blades without rope-access technicians on the blade. It is raised along the stopped blade from the turbine, and its interchangeable tools clean blades and towers, prepare the surface, remove old leading-edge protection tape, apply primer and filler, sand, and coat the leading edge, repairing level 1 to 3 leading-edge erosion before it progresses. Further modules test lightning protection systems, inspect drainage holes and apply ice-phobic coatings. The whole kit travels in one van and is usually run by three Aerones technicians working from a vehicle at the base of the turbine. Aerones says the robots work about five times faster than people, can operate in winds of up to 15 m/s against about 9 m/s for rope teams, and cut turbine downtime by four to six times, widening the repair season. Coatings include AkzoNobel's Relest system, and inspection data flows into Aerones' cloud platform for maintenance planning. The leading-edge repair system was unveiled in January 2023.
주요 기능
- Leading-edge erosion repair (levels 1-3): tape removal, cleaning, sanding, primer, filler and protective coating
- Blade and tower cleaning
- ice-phobic coating application
- Lightning protection system testing and drainage hole inspection
- Interchangeable tool modules on one robotic platform
- Works in winds up to about 15 m/s (vs about 9 m/s for technicians)
- About 5x faster than manual work
- 4-6x less turbine downtime
- Transported in a single van
- operated by three technicians from a vehicle
- Cloud platform for inspection data and preventive maintenance planning
기술 사양
| 이동성 | |
| 이동 방식 | 기타 |
|---|---|
| 작동 환경 | Outdoor, onshore and offshore wind turbines |
| 센싱 & 컴퓨팅 | |
| 소프트웨어 / AI | Aerones cloud platform for inspection data and maintenance planning |
로봇 포럼
포럼 불러오는 중...
기술 사양
| 이동성 | |
| 이동 방식 | 기타 |
|---|---|
| 작동 환경 | Outdoor, onshore and offshore wind turbines |
| 센싱 & 컴퓨팅 | |
| 소프트웨어 / AI | Aerones cloud platform for inspection data and maintenance planning |
이미지
martti
martti
martti
martti
martti
martti이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Aerones Wind Turbine Blade Maintenance Robot?
Aerones' modular robotic system services wind turbine blades without rope-access technicians on the blade. It is raised along the stopped blade from the turbine, and its interchangeable tools clean blades and towers, prepare the surface, remove old leading-edge protection tape, apply primer and filler, sand, and coat t…
Who makes the Aerones Wind Turbine Blade Maintenance Robot?
The Aerones Wind Turbine Blade Maintenance Robot is made by Aerones, a robotics company based in Latvia.
How much does the Aerones Wind Turbine Blade Maintenance Robot cost?
Aerones has not publicly announced pricing for the Aerones Wind Turbine Blade Maintenance Robot. You can enquire through RobotAIGeek for current pricing.
What is the Aerones Wind Turbine Blade Maintenance Robot used for?
The Aerones Wind Turbine Blade Maintenance Robot is designed for 청소, 코팅, 도장, and 테스트. It is used in 에너지 settings.
When was the Aerones Wind Turbine Blade Maintenance Robot released?
The Aerones Wind Turbine Blade Maintenance Robot was released in 2023.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Aerones Wind Turbine Blade Maintenance Robot vs Lombrico S Ex-0
- Aerones Wind Turbine Blade Maintenance Robot vs Lombrico XT Ex-0
- Aerones Wind Turbine Blade Maintenance Robot vs Lombrico XXS Ex-0
- Aerones Wind Turbine Blade Maintenance Robot vs Lombrico X FTC Ex-0
- Aerones Wind Turbine Blade Maintenance Robot vs Lombrico SP
