説明
Aerones Wind Turbine Blade Maintenance RobotはAeronesのIndustrial-Robotです。 清掃、コーティング、塗装向けに設計されています。 主な数値：2023年発売。
Aerones' modular robotic system services wind turbine blades without rope-access technicians on the blade. It is raised along the stopped blade from the turbine, and its interchangeable tools clean blades and towers, prepare the surface, remove old leading-edge protection tape, apply primer and filler, sand, and coat the leading edge, repairing level 1 to 3 leading-edge erosion before it progresses. Further modules test lightning protection systems, inspect drainage holes and apply ice-phobic coatings. The whole kit travels in one van and is usually run by three Aerones technicians working from a vehicle at the base of the turbine. Aerones says the robots work about five times faster than people, can operate in winds of up to 15 m/s against about 9 m/s for rope teams, and cut turbine downtime by four to six times, widening the repair season. Coatings include AkzoNobel's Relest system, and inspection data flows into Aerones' cloud platform for maintenance planning. The leading-edge repair system was unveiled in January 2023.
特長
- Leading-edge erosion repair (levels 1-3): tape removal, cleaning, sanding, primer, filler and protective coating
- Blade and tower cleaning
- ice-phobic coating application
- Lightning protection system testing and drainage hole inspection
- Interchangeable tool modules on one robotic platform
- Works in winds up to about 15 m/s (vs about 9 m/s for technicians)
- About 5x faster than manual work
- 4-6x less turbine downtime
- Transported in a single van
- operated by three technicians from a vehicle
- Cloud platform for inspection data and preventive maintenance planning
技術仕様
| 移動性能 | |
| 移動方式 | その他 |
|---|---|
| 使用環境 | Outdoor, onshore and offshore wind turbines |
| センシング・演算 | |
| ソフトウェア / AI | Aerones cloud platform for inspection data and maintenance planning |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
| 移動性能 | |
| 移動方式 | その他 |
|---|---|
| 使用環境 | Outdoor, onshore and offshore wind turbines |
| センシング・演算 | |
| ソフトウェア / AI | Aerones cloud platform for inspection data and maintenance planning |
画像
martti
martti
martti
martti
martti
martti投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the Aerones Wind Turbine Blade Maintenance Robot?
Aerones' modular robotic system services wind turbine blades without rope-access technicians on the blade. It is raised along the stopped blade from the turbine, and its interchangeable tools clean blades and towers, prepare the surface, remove old leading-edge protection tape, apply primer and filler, sand, and coat t…
Who makes the Aerones Wind Turbine Blade Maintenance Robot?
The Aerones Wind Turbine Blade Maintenance Robot is made by Aerones, a robotics company based in Latvia.
How much does the Aerones Wind Turbine Blade Maintenance Robot cost?
Aerones has not publicly announced pricing for the Aerones Wind Turbine Blade Maintenance Robot. You can enquire through RobotAIGeek for current pricing.
What is the Aerones Wind Turbine Blade Maintenance Robot used for?
The Aerones Wind Turbine Blade Maintenance Robot is designed for 清掃, コーティング, 塗装, and テスト. It is used in エネルギー settings.
When was the Aerones Wind Turbine Blade Maintenance Robot released?
The Aerones Wind Turbine Blade Maintenance Robot was released in 2023.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- Aerones Wind Turbine Blade Maintenance Robot vs Lombrico S Ex-0
- Aerones Wind Turbine Blade Maintenance Robot vs Lombrico XT Ex-0
- Aerones Wind Turbine Blade Maintenance Robot vs Lombrico XXS Ex-0
- Aerones Wind Turbine Blade Maintenance Robot vs Lombrico X FTC Ex-0
- Aerones Wind Turbine Blade Maintenance Robot vs Lombrico SP
