설명
DRIVE은(는) IMS Robotics의 Industrial-Robot입니다. 청소, 점검, 원격 용도로 설계되었습니다. 주요 수치: 21 kg.
The DRIVE is IMS Robotics' robust self-propelled cutting robot for small main sewers and sewage collectors from DN 150 to DN 400. It drives into the pipe on its own carriage, where its cutting arm turns through 400 degrees and swivels about 90 degrees to remove deposits and to reopen lateral connections after a liner has been installed, while an integrated colour camera with LED lighting shows the operator the cutting point. A pneumatic stabiliser braces the carriage for stability and traction, permanent internal nitrogen pressure monitoring protects the electronics, and a reverse-driving sensor helps on the way back. The system ships with a cable drum carrying 100 m or 150 m of supply hose and a removable control unit with two joysticks and a tablet; the carriage weighs about 21 kg.
주요 기능
- Usable in pipes DN 150 to DN 400
- Carriage outer diameter 120 mm
- carriage approx. 1150 x 190 x 175 mm (DN 250 setup)
- approx. 21 kg
- 400-degree electric rotation
- approx. 90-degree servo-pneumatic swivel (approx. 200 mm)
- Integrated colour camera with LED and extra lighting
- camera cleaning with permanent air
- Pneumatic stabiliser for stability and traction
- permanent internal nitrogen pressure monitoring
- reverse-driving sensor
- Cable drum with 100 m or 150 m supply hose (approx. 88 / 104 kg), manual brake
- Removable control unit with 2 joysticks in protective case and tablet
- Options: automatic winding, meter counter, water equipment, granulate and corundum wheel sets, vehicle installation set
기술 사양
검증됨| 물리 사양 | |
| 무게 | 21 kg |
|---|---|
| 크기 | L 1.15 m × W 190 mm × H 175 mm |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 작동 환경 | Inside main sewers and sewage collectors (underground pipes) |
| 센싱 & 컴퓨팅 | |
| 센서 | colour camera with LED lighting, reverse-driving sensor, internal pressure monitoring |
| 연결성 | Wired (umbilical supply hose / cable) |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 21 kg |
|---|---|
| 크기 | L 1.15 m × W 190 mm × H 175 mm |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 작동 환경 | Inside main sewers and sewage collectors (underground pipes) |
| 센싱 & 컴퓨팅 | |
| 센서 | colour camera with LED lighting, reverse-driving sensor, internal pressure monitoring |
| 연결성 | Wired (umbilical supply hose / cable) |
이미지
martti
martti
martti
martti이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the DRIVE?
The DRIVE is IMS Robotics' robust self-propelled cutting robot for small main sewers and sewage collectors from DN 150 to DN 400. It drives into the pipe on its own carriage, where its cutting arm turns through 400 degrees and swivels about 90 degrees to remove deposits and to reopen lateral connections after a liner h…
Who makes the DRIVE?
The DRIVE is made by IMS Robotics, a robotics company based in Germany.
How much does the DRIVE cost?
IMS Robotics has not publicly announced pricing for the DRIVE. You can enquire through RobotAIGeek for current pricing.
What is the DRIVE used for?
The DRIVE is designed for 청소, 점검, and 원격. It is used in 청소·시설 관리 and 건설 settings.
How much does the DRIVE weigh?
The DRIVE weighs 21 kg.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
DRIVE 대체 로봇 →
