RobotAIGeek
★評価はまだありません

sudo R1

HumanoidChinaChinaリリース済み
sudo R1
比較
情報源:
用途:
ピック&プレースBin picking and object sortingmanufacturing and logistics handlingretail and food-service taskshome and healthcare assistance
価格:
未発表

説明

sudo R1はsudoのHumanoidです。 ピック&プレース、Bin picking and object sorting、manufacturing and logistics handling向けに設計されています。 主な数値:稼働時間 120 分、可搬質量 5 kg、16 自由度。

The sudo R1 is a fully integrated robot system — sudo's own hardware and software together — built around a manipulation-centric foundation model aimed squarely at object picking. What makes it unusual is how it was trained: entirely on simulation data, with zero real-world demonstrations, yet sudo reports roughly 98% first-attempt success and close to 100% with retries, demonstrated in a 60-minute uncut evaluation rather than cherry-picked clips. Its generalisation claim covers the awkward end of the object spectrum — rigid and deformable, opaque and transparent, matte and reflective — which is precisely where conventional vision-based grasping degrades. The hardware is a dual-arm mobile manipulator standing 1,634.5 mm with a 615 mm torso lift, giving it a working range from bin level to shelf height, on a compact 780 by 520 mm base. Each arm has seven degrees of freedom and carries 5 kg, with two more in the torso. Perception is dense: ten to sixteen cameras and four LiDARs. A 48 V 52 Ah pack gives about two hours per charge.

特長

  • Fully integrated system with sudo's own hardware and software, powered by a manipulation-centric foundation model focused on object picking
  • trained on simulation data alone with zero real-world demonstrations
  • approximately 98% first-attempt grasp success and nearly 100% with retries, shown in a 60-minute uncut continuous evaluation
  • strong zero-shot generalisation across rigid and deformable, opaque and transparent, matte and reflective objects
  • 1,634.5 mm standard posture height with 615 mm of torso lift
  • twin 7-degree-of-freedom arms carrying 5 kg each, plus 2 degrees of freedom in the torso
  • 10 to 16 cameras with 4 LiDARs
  • 48 V 52 Ah battery for roughly 2 hours per charge
  • compact 780 x 520 mm base
  • backed by a proprietary simulation engine, large-scale simulation data and a developer tool suite.

技術仕様

検証済み
本体
寸法L 780 mm × W 520 mm × H 1.63 m
可搬重量5 kg
移動性能
移動方式車輪型
自由度16
マニピュレーション高
アクチュエーターTwin 7-DoF arms plus 2-DoF torso on a 615 mm lifting column over a wheeled base measuring 780 x 520 mm
電源
バッテリー駆動時間~2 h
センシング・演算
センサー10 to 16 cameras, 4x LiDAR
ソフトウェア / AIManipulation-centric foundation model for object picking, trained on simulation data alone; proprietary simulation engine with large-scale synthetic data; general robot manipulation model with a developer tool suite
メーカー情報第三者情報情報源なし情報源のステータスは、このロボットに登録された情報源に基づきます。

ロボットフォーラム

フォーラムを読み込み中...

よくある質問

What is the sudo R1?

The sudo R1 is a fully integrated robot system — sudo's own hardware and software together — built around a manipulation-centric foundation model aimed squarely at object picking.

Who makes the sudo R1?

The sudo R1 is made by sudo, a robotics company based in China.

How much does the sudo R1 cost?

sudo has not publicly announced pricing for the sudo R1. You can enquire through RobotAIGeek for current pricing.

What is the sudo R1 used for?

The sudo R1 is designed for ピック&プレース, bin picking and object sorting, manufacturing and logistics handling, and retail and food-service tasks. It is used in 医療, 倉庫・物流, 製造, and 小売 settings.

What is the payload capacity of the sudo R1?

The sudo R1 has a payload capacity of 5 kg.

What is the battery life of the sudo R1?

The sudo R1 runs for ~2 h on a charge.

How many degrees of freedom does the sudo R1 have?

The sudo R1 has 16 degrees of freedom.

類似ロボットと比較

このロボットが最も近い代替候補とどう比べられるかをご覧ください

sudo R1 の代替候補 →

関連ロボット

もっと見る >

最新ロボット情報を毎週ニュースレターで受け取りませんか?