RobotAIGeek
★Noch nicht bewertet

Type UB Water Jet Robot

Cleaning-RobotsJapanJapanVeröffentlicht
Type UB Water Jet Robot
Vergleichen
Preis:
Nicht angekündigt
Modell:
UB600 / UB400

BESCHREIBUNG

Type UB Water Jet Robot ist ein Cleaning-Robots von Urakami Research & Development. Er ist für Reinigung, Fernsteuerung ausgelegt. Eckdaten: 350 kg.

The Type UB is Urakami's remote-controlled ultra-high-pressure water-jet robot. It sticks to a wall, ceiling or floor by vacuum and drives along the surface while a rotating nozzle inside its suction cup fires water at up to 3,200 kgf/cm2 to strip paint and linings quickly, for example before non-destructive testing of weld lines on gas holders and oil tanks or before repainting building facades. All waste water is sucked back through the suction cup by the high-speed airflow, leaving the surface dry, so no rust inhibitor has to be added to the water and spray does not pollute the surroundings. Operators work by remote control without scaffolding or holding a heavy nozzle against the jet's recoil, which also cuts radiation exposure in nuclear facilities. A fall-arrest device or a dedicated auto-tension winch guards against a power cut. It works on magnetic steel, stainless steel, concrete, glass, plastic, tile and rubber linings, over weld seams and joints, and comes as the UB600 (about 400 mm wide, up to 9 m/min) and the UB400. A licensed US partner has sold this water-jet robot since 1997.

FUNKTIONEN

  • Vacuum adhesion on walls, ceilings and floors
  • self-propelled
  • Rotating ultra-high-pressure nozzle inside the suction cup, up to 3,200 kgf/cm2
  • Waste water fully recovered
  • surface left dry
  • No rust inhibitor needed in the water
  • Remote-controlled, no scaffolding
  • Fall-arrest device or auto-tension winch for power failure
  • Works on steel, stainless, concrete, glass, plastic, tile, rubber lining
  • UB600: approx. 400 mm width, up to 9 m/min, approx. 350 kgf
  • UB400: approx. 300 mm width, up to 6 m/min, approx. 80 kgf
  • Water-jet pump unit: max 21 L/min

TECHNISCHE DATEN

Verifiziert
Physisch
Gewicht350 kg
AbmessungenL 1.32 m × W 1.13 m × H 710 mm
Mobilität
BewegungsartSonstige
Geschwindigkeit0.54 km/h
EinsatzumgebungWalls, ceilings and floors of gas holders, oil tanks, ship hulls, buildings and nuclear facilities
HerstellerangabeDrittquelleOhne QuelleDer Quellenstatus basiert auf den angegebenen Quellen dieses Roboters.

ROBOTER-FOREN

Foren werden geladen...

HÄUFIG GESTELLTE FRAGEN

What is the Type UB Water Jet Robot?

The Type UB is Urakami's remote-controlled ultra-high-pressure water-jet robot. It sticks to a wall, ceiling or floor by vacuum and drives along the surface while a rotating nozzle inside its suction cup fires water at up to 3,200 kgf/cm2 to strip paint and linings quickly, for example before non-destructive testing of…

Who makes the Type UB Water Jet Robot?

The Type UB Water Jet Robot is made by Urakami Research & Development, a robotics company based in Japan.

How much does the Type UB Water Jet Robot cost?

Urakami Research & Development has not publicly announced pricing for the Type UB Water Jet Robot. You can enquire through RobotAIGeek for current pricing.

What is the Type UB Water Jet Robot used for?

The Type UB Water Jet Robot is designed for reinigung and fernsteuerung. It is used in energie, bauwesen, and fertigung settings.

How much does the Type UB Water Jet Robot weigh?

The Type UB Water Jet Robot weighs 350 kg.

How fast is the Type UB Water Jet Robot?

The Type UB Water Jet Robot can move at speeds of up to 0.54 km/h.

MIT ÄHNLICHEN ROBOTERN VERGLEICHEN

Sehen Sie, wie sich dieser Roboter gegenüber seinen nächsten Alternativen schlägt

Alternativen zu Type UB Water Jet Robot →

ÄHNLICHE ROBOTER

MEHR ANZEIGEN >

WÖCHENTLICHE NEWS ZU DEN NEUESTEN ROBOTER-UPDATES ERHALTEN?