RobotAIGeek
★評価はまだありません

Type UB Water Jet Robot

Cleaning-RobotsJapanJapanリリース済み
Type UB Water Jet Robot
比較
情報源:
価格:
未発表
モデル:
UB600 / UB400

説明

Type UB Water Jet RobotはUrakami Research & DevelopmentのCleaning-Robotsです。 清掃、リモート向けに設計されています。 主な数値:350 kg。

The Type UB is Urakami's remote-controlled ultra-high-pressure water-jet robot. It sticks to a wall, ceiling or floor by vacuum and drives along the surface while a rotating nozzle inside its suction cup fires water at up to 3,200 kgf/cm2 to strip paint and linings quickly, for example before non-destructive testing of weld lines on gas holders and oil tanks or before repainting building facades. All waste water is sucked back through the suction cup by the high-speed airflow, leaving the surface dry, so no rust inhibitor has to be added to the water and spray does not pollute the surroundings. Operators work by remote control without scaffolding or holding a heavy nozzle against the jet's recoil, which also cuts radiation exposure in nuclear facilities. A fall-arrest device or a dedicated auto-tension winch guards against a power cut. It works on magnetic steel, stainless steel, concrete, glass, plastic, tile and rubber linings, over weld seams and joints, and comes as the UB600 (about 400 mm wide, up to 9 m/min) and the UB400. A licensed US partner has sold this water-jet robot since 1997.

特長

  • Vacuum adhesion on walls, ceilings and floors
  • self-propelled
  • Rotating ultra-high-pressure nozzle inside the suction cup, up to 3,200 kgf/cm2
  • Waste water fully recovered
  • surface left dry
  • No rust inhibitor needed in the water
  • Remote-controlled, no scaffolding
  • Fall-arrest device or auto-tension winch for power failure
  • Works on steel, stainless, concrete, glass, plastic, tile, rubber lining
  • UB600: approx. 400 mm width, up to 9 m/min, approx. 350 kgf
  • UB400: approx. 300 mm width, up to 6 m/min, approx. 80 kgf
  • Water-jet pump unit: max 21 L/min

技術仕様

検証済み
本体
重量350 kg
寸法L 1.32 m × W 1.13 m × H 710 mm
移動性能
移動方式その他
速度0.54 km/h
使用環境Walls, ceilings and floors of gas holders, oil tanks, ship hulls, buildings and nuclear facilities
メーカー情報第三者情報情報源なし情報源のステータスは、このロボットに登録された情報源に基づきます。

ロボットフォーラム

フォーラムを読み込み中...

よくある質問

What is the Type UB Water Jet Robot?

The Type UB is Urakami's remote-controlled ultra-high-pressure water-jet robot. It sticks to a wall, ceiling or floor by vacuum and drives along the surface while a rotating nozzle inside its suction cup fires water at up to 3,200 kgf/cm2 to strip paint and linings quickly, for example before non-destructive testing of…

Who makes the Type UB Water Jet Robot?

The Type UB Water Jet Robot is made by Urakami Research & Development, a robotics company based in Japan.

How much does the Type UB Water Jet Robot cost?

Urakami Research & Development has not publicly announced pricing for the Type UB Water Jet Robot. You can enquire through RobotAIGeek for current pricing.

What is the Type UB Water Jet Robot used for?

The Type UB Water Jet Robot is designed for 清掃 and リモート. It is used in エネルギー, 建設, and 製造 settings.

How much does the Type UB Water Jet Robot weigh?

The Type UB Water Jet Robot weighs 350 kg.

How fast is the Type UB Water Jet Robot?

The Type UB Water Jet Robot can move at speeds of up to 0.54 km/h.

類似ロボットと比較

このロボットが最も近い代替候補とどう比べられるかをご覧ください

Type UB Water Jet Robot の代替候補 →

関連ロボット

もっと見る >

最新ロボット情報を毎週ニュースレターで受け取りませんか?