★아직 평가 없음

Type UB Water Jet Robot

Cleaning-RobotsJapanJapan출시됨
Type UB Water Jet Robot
비교
가격:
미공개
모델:
UB600 / UB400

설명

Type UB Water Jet Robot은(는) Urakami Research & Development의 Cleaning-Robots입니다. 청소, 원격 용도로 설계되었습니다. 주요 수치: 350 kg.

The Type UB is Urakami's remote-controlled ultra-high-pressure water-jet robot. It sticks to a wall, ceiling or floor by vacuum and drives along the surface while a rotating nozzle inside its suction cup fires water at up to 3,200 kgf/cm2 to strip paint and linings quickly, for example before non-destructive testing of weld lines on gas holders and oil tanks or before repainting building facades. All waste water is sucked back through the suction cup by the high-speed airflow, leaving the surface dry, so no rust inhibitor has to be added to the water and spray does not pollute the surroundings. Operators work by remote control without scaffolding or holding a heavy nozzle against the jet's recoil, which also cuts radiation exposure in nuclear facilities. A fall-arrest device or a dedicated auto-tension winch guards against a power cut. It works on magnetic steel, stainless steel, concrete, glass, plastic, tile and rubber linings, over weld seams and joints, and comes as the UB600 (about 400 mm wide, up to 9 m/min) and the UB400. A licensed US partner has sold this water-jet robot since 1997.

주요 기능

  • Vacuum adhesion on walls, ceilings and floors
  • self-propelled
  • Rotating ultra-high-pressure nozzle inside the suction cup, up to 3,200 kgf/cm2
  • Waste water fully recovered
  • surface left dry
  • No rust inhibitor needed in the water
  • Remote-controlled, no scaffolding
  • Fall-arrest device or auto-tension winch for power failure
  • Works on steel, stainless, concrete, glass, plastic, tile, rubber lining
  • UB600: approx. 400 mm width, up to 9 m/min, approx. 350 kgf
  • UB400: approx. 300 mm width, up to 6 m/min, approx. 80 kgf
  • Water-jet pump unit: max 21 L/min

기술 사양

검증됨
물리 사양
무게350 kg
크기L 1.32 m × W 1.13 m × H 710 mm
이동성
이동 방식기타
속도0.54 km/h
작동 환경Walls, ceilings and floors of gas holders, oil tanks, ship hulls, buildings and nuclear facilities
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the Type UB Water Jet Robot?

The Type UB is Urakami's remote-controlled ultra-high-pressure water-jet robot. It sticks to a wall, ceiling or floor by vacuum and drives along the surface while a rotating nozzle inside its suction cup fires water at up to 3,200 kgf/cm2 to strip paint and linings quickly, for example before non-destructive testing of…

Who makes the Type UB Water Jet Robot?

The Type UB Water Jet Robot is made by Urakami Research & Development, a robotics company based in Japan.

How much does the Type UB Water Jet Robot cost?

Urakami Research & Development has not publicly announced pricing for the Type UB Water Jet Robot. You can enquire through RobotAIGeek for current pricing.

What is the Type UB Water Jet Robot used for?

The Type UB Water Jet Robot is designed for 청소 and 원격. It is used in 에너지, 건설, and 제조 settings.

How much does the Type UB Water Jet Robot weigh?

The Type UB Water Jet Robot weighs 350 kg.

How fast is the Type UB Water Jet Robot?

The Type UB Water Jet Robot can move at speeds of up to 0.54 km/h.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

Type UB Water Jet Robot 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?