FlexArm 6X

Dr Robot

Industrial-Robot Canada

CanadaVeröffentlicht

★Noch nicht bewertet

Vergleichen

Quellen:

jaguar.drrobot.com

Branchen:

Forschung Bildung Fertigung

Anwendungen:

Materialhandhabung Sonstige InspektionRobotics and control research

Preis:

Nicht angekündigt

Modell:

Dr Robot FlexArm 6X smart robotic arm (AIMechatronix)

BESCHREIBUNG

FlexArm 6X ist ein Industrial-Robot von Dr Robot. Er ist für Materialhandhabung, Sonstige, Inspektion ausgelegt. Eckdaten: 18 kg, 3 kg Traglast.

The FlexArm 6X is Dr Robot's 6-DOF smart robotic arm for research, development and precision manipulation. It weighs 18 kg, reaches 500 mm, carries 3 kg nominal (4 kg at reduced speed), moves its joints at up to 180 degrees/s and its tool point at up to 2 m/s with +/-4 mm position accuracy, and is built from aircraft-grade aluminium with steel joints and ceramic hybrid bearings. An NVIDIA Jetson Orin Nano with an FPGA-based motion controller runs joint-space, Cartesian and trajectory control, with force/torque sensing hardware for force control listed as not yet available; programming is through C++ and Python APIs, ROS 2, MATLAB/Simulink and Unity, with kinematics, trajectory-planning and vision libraries. A 1080p gripper camera, joint encoders, current sensing and collision detection support safety features such as teaching mode, reduced speed and virtual barriers, and it draws at most 80 W from mains power.

FUNKTIONEN

6-DOF
500 mm reach
3 kg nominal payload
Up to 180 degrees/s joint speed, 2 m/s TCP
+/-4 mm
NVIDIA Jetson Orin Nano + FPGA motion controller
C++/Python APIs, ROS 2, MATLAB/Simulink, Unity
1080p gripper camera
collision detection
Max 80 W, 100-240 V AC

TECHNISCHE DATEN

Verifiziert

Physisch
Gewicht	18 kg
Traglast	3 kg
Mobilität
Bewegungsart	Stationär
Einsatzumgebung	Laboratories, classrooms and light industrial benches, 5 to 40 C

HerstellerangabeDrittquelleOhne QuelleDer Quellenstatus basiert auf den angegebenen Quellen dieses Roboters.

ROBOTER-FOREN

Foren werden geladen...

TECHNISCHE DATEN

Verifiziert

Physisch
Gewicht	18 kg
Traglast	3 kg
Mobilität
Bewegungsart	Stationär
Einsatzumgebung	Laboratories, classrooms and light industrial benches, 5 to 40 C

HerstellerangabeDrittquelleOhne QuelleDer Quellenstatus basiert auf den angegebenen Quellen dieses Roboters.

HÄUFIG GESTELLTE FRAGEN

What is the FlexArm 6X?

Who makes the FlexArm 6X?

The FlexArm 6X is made by Dr Robot, a robotics company based in Canada.

How much does the FlexArm 6X cost?

Dr Robot has not publicly announced pricing for the FlexArm 6X. You can enquire through RobotAIGeek for current pricing.

What is the FlexArm 6X used for?

The FlexArm 6X is designed for materialhandhabung, sonstige, inspektion, and robotics and control research. It is used in forschung, bildung, and fertigung settings.