描述
AutoNAV 10是Kompaï Robotics的Mobile-Robots。 面向導覽、運輸設計。 關鍵數據:1500 kg、續航 240 分鐘。
AutoNAV 10 is an autonomous shuttle for closed sites from KOMPAI robotics' ROBOSOFT engineering range, carrying 10 passengers (6 seated and 4 standing). It follows a defined route at up to 50 km/h on flat ground, turns in a radius of only 3.4 m with both axles steering, and runs for over four hours depending on use. It is meant for tourist areas, large industrial sites, zoos and parks, city shuttle services and robotics R&D. Four-wheel drive with 15 kW per axle, oleo-pneumatic suspension, interior ventilation, motorised sliding doors, seat belts and grab handles give a comfortable, safe ride, while laser and RTK GPS guidance with redundant front and rear safety sensors handle navigation and obstacle detection. It is CE certified under Machinery Directive 2006/42/EC and runs PURE low-level supervision with an optional NVIDIA Jetson TX2 komNAV navigation supervisor.
功能特色
- 10 passengers: 6 seated + 4 standing
- Up to 50 km/h on flat surfaces
- 10% max gradient
- Turning radius 3.4 m (double steering axle) or 7 m (single)
- Four-wheel drive, 15 kW per axle, front and rear mechanical differentials
- Oleo-pneumatic suspension, interior ventilation, motorised sliding doors
- Laser and RTK GPS guidance
- redundant front and rear safety sensors
- 73.6 V, 200 Ah, 14.7 kW LiFePO4 batteries
- over 4 hours autonomy
- 8 h full recharge
- Operating range -10 to +50 C
- CE Machinery Directive 2006/42/EC
技術規格
已驗證| 物理參數 | |
| 重量 | 1500 kg |
|---|---|
| 外形尺寸 | L 4.3 m × W 1.9 m × H 2.2 m |
| 移動能力 | |
| 移動類型 | 帶輪的 |
| 速度 | 50 km/h |
| 作業環境 | Outdoor closed sites: tourist areas, large industrial sites, zoos and parks, -10°C to 50°C |
| 電源與續航 | |
| 續航時間 | 240 min |
| 感知與計算 | |
| 感測器 | laser scanner, RTK GPS, front and rear safety sensors |
機器人論壇
正在載入論壇...
技術規格
已驗證| 物理參數 | |
| 重量 | 1500 kg |
|---|---|
| 外形尺寸 | L 4.3 m × W 1.9 m × H 2.2 m |
| 移動能力 | |
| 移動類型 | 帶輪的 |
| 速度 | 50 km/h |
| 作業環境 | Outdoor closed sites: tourist areas, large industrial sites, zoos and parks, -10°C to 50°C |
| 電源與續航 | |
| 續航時間 | 240 min |
| 感知與計算 | |
| 感測器 | laser scanner, RTK GPS, front and rear safety sensors |
圖片



圖片貢獻
影片
機器人論壇
正在載入論壇...
評分
常見問題
What is the AutoNAV 10?
AutoNAV 10 is an autonomous shuttle for closed sites from KOMPAI robotics' ROBOSOFT engineering range, carrying 10 passengers (6 seated and 4 standing). It follows a defined route at up to 50 km/h on flat ground, turns in a radius of only 3.4 m with both axles steering, and runs for over four hours depending on use.
Who makes the AutoNAV 10?
The AutoNAV 10 is made by Kompaï Robotics, a robotics company based in France.
How much does the AutoNAV 10 cost?
Kompaï Robotics has not publicly announced pricing for the AutoNAV 10. You can enquire through RobotAIGeek for current pricing.
What is the AutoNAV 10 used for?
The AutoNAV 10 is designed for 導覽 and 運輸. It is used in 休閒旅遊, 研究, and 製造業 settings.
How much does the AutoNAV 10 weigh?
The AutoNAV 10 weighs 1,500 kg.
How fast is the AutoNAV 10?
The AutoNAV 10 can move at speeds of up to 50 km/h.
What is the battery life of the AutoNAV 10?
The AutoNAV 10 runs for about 240 minutes on a charge.
與同類機器人對比
看看這款機器人與最接近的同類產品相比表現如何
- AutoNAV 10 vs NAVER LABS ALT-B
- AutoNAV 10 vs Corenetic Monte S1
- AutoNAV 10 vs Slamtec 48V Hermes
- AutoNAV 10 vs Navimow Terranox CM240M1
- AutoNAV 10 vs Jianghuai Embodied Intelligent Charging Robot







