설명
AutoNAV 10은(는) Kompaï Robotics의 Mobile-Robots입니다. 내비게이션, 운반 용도로 설계되었습니다. 주요 수치: 1500 kg, 가동 시간 240분.
AutoNAV 10 is an autonomous shuttle for closed sites from KOMPAI robotics' ROBOSOFT engineering range, carrying 10 passengers (6 seated and 4 standing). It follows a defined route at up to 50 km/h on flat ground, turns in a radius of only 3.4 m with both axles steering, and runs for over four hours depending on use. It is meant for tourist areas, large industrial sites, zoos and parks, city shuttle services and robotics R&D. Four-wheel drive with 15 kW per axle, oleo-pneumatic suspension, interior ventilation, motorised sliding doors, seat belts and grab handles give a comfortable, safe ride, while laser and RTK GPS guidance with redundant front and rear safety sensors handle navigation and obstacle detection. It is CE certified under Machinery Directive 2006/42/EC and runs PURE low-level supervision with an optional NVIDIA Jetson TX2 komNAV navigation supervisor.
주요 기능
- 10 passengers: 6 seated + 4 standing
- Up to 50 km/h on flat surfaces
- 10% max gradient
- Turning radius 3.4 m (double steering axle) or 7 m (single)
- Four-wheel drive, 15 kW per axle, front and rear mechanical differentials
- Oleo-pneumatic suspension, interior ventilation, motorised sliding doors
- Laser and RTK GPS guidance
- redundant front and rear safety sensors
- 73.6 V, 200 Ah, 14.7 kW LiFePO4 batteries
- over 4 hours autonomy
- 8 h full recharge
- Operating range -10 to +50 C
- CE Machinery Directive 2006/42/EC
기술 사양
검증됨| 물리 사양 | |
| 무게 | 1500 kg |
|---|---|
| 크기 | L 4.3 m × W 1.9 m × H 2.2 m |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 50 km/h |
| 작동 환경 | Outdoor closed sites: tourist areas, large industrial sites, zoos and parks, -10°C to 50°C |
| 전원 | |
| 배터리 지속 시간 | 240 min |
| 센싱 & 컴퓨팅 | |
| 센서 | laser scanner, RTK GPS, front and rear safety sensors |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 1500 kg |
|---|---|
| 크기 | L 4.3 m × W 1.9 m × H 2.2 m |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 50 km/h |
| 작동 환경 | Outdoor closed sites: tourist areas, large industrial sites, zoos and parks, -10°C to 50°C |
| 전원 | |
| 배터리 지속 시간 | 240 min |
| 센싱 & 컴퓨팅 | |
| 센서 | laser scanner, RTK GPS, front and rear safety sensors |
이미지



이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the AutoNAV 10?
AutoNAV 10 is an autonomous shuttle for closed sites from KOMPAI robotics' ROBOSOFT engineering range, carrying 10 passengers (6 seated and 4 standing). It follows a defined route at up to 50 km/h on flat ground, turns in a radius of only 3.4 m with both axles steering, and runs for over four hours depending on use.
Who makes the AutoNAV 10?
The AutoNAV 10 is made by Kompaï Robotics, a robotics company based in France.
How much does the AutoNAV 10 cost?
Kompaï Robotics has not publicly announced pricing for the AutoNAV 10. You can enquire through RobotAIGeek for current pricing.
What is the AutoNAV 10 used for?
The AutoNAV 10 is designed for 내비게이션 and 운반. It is used in 레저·관광, 연구, and 제조 settings.
How much does the AutoNAV 10 weigh?
The AutoNAV 10 weighs 1,500 kg.
How fast is the AutoNAV 10?
The AutoNAV 10 can move at speeds of up to 50 km/h.
What is the battery life of the AutoNAV 10?
The AutoNAV 10 runs for about 240 minutes on a charge.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- AutoNAV 10 vs NAVER LABS ALT-B
- AutoNAV 10 vs Corenetic Monte S1
- AutoNAV 10 vs Slamtec 48V Hermes
- AutoNAV 10 vs Navimow Terranox CM240M1
- AutoNAV 10 vs Jianghuai Embodied Intelligent Charging Robot







