RobotAIGeek
★아직 평가 없음

GC Robotics C30

GC Robotics
Mobile-RobotsChinaChina출시됨
GC Robotics C30
비교
출처:
gcarobotics.com
산업:
연구헬스케어창고·물류리테일
용도:
점검운반Warehouse automationhospital service robotscommercial service robotsindoor inspectionnarrow-aisle transport
가격:
미공개

설명

The C30 is the smallest of GC Robotics' indoor platforms and the only round one — a 500 mm cylinder just 225 mm tall, weighing 30 kg. The shape is functional rather than stylistic: a circular footprint rotating in place cannot catch a corner, which is what lets it work aisles as narrow as 70 cm. It navigates by Laser SLAM to a stated positioning accuracy of ±2.5 cm, with LiDAR, a depth camera, an IMU, wheel odometry and a bumper strip included as standard, and it carries 40 kg on a modular payload platform. Endurance is up to ten hours unloaded from a 24 V 18 Ah pack with automatic charging. Like the rest of the range it is sold for rapid secondary development, with a web interface and development API on top of the shared GC Robotics software platform, and the manufacturer points it at warehouse automation, hospital service, commercial robots and indoor inspection.

주요 기능

  • Ø500 x 225 mm and 30 kg, the smallest platform in the range
  • Round footprint enabling rotation in place without catching corners
  • Minimum aisle width 70 cm
  • Positioning accuracy ±2.5 cm by Laser SLAM
  • Maximum payload 40 kg on a modular payload platform
  • Sensor suite included: LiDAR, depth camera, IMU, wheel odometry and bumper strip
  • Differential drive that can rotate in place
  • Maximum linear speed 1 m/s
  • maximum angular speed ±1.0 rad/s
  • Drive motors 350 W x 2
  • encoder resolution 1024 lines
  • independent suspension
  • Wheel track 398 mm
  • wheel diameter 165 mm
  • Battery 24 V / 18 Ah
  • operating endurance up to 10 h unloaded on a flat surface
  • Charging time 4 h
  • charger 29 V / 5 A
  • automatic charging supported
  • Operating temperature 0 to 42 degrees Celsius, indoor
  • Interfaces: HTTP API, RJ45, Wi-Fi and a 4-pin aviation plug
  • Web interface and secondary development API

기술 사양

검증됨
물리 사양
무게30 kg
크기H 225 mm
가반하중40 kg
이동성
이동 방식바퀴형
속도3.6 km/h
작동 환경Indoor, 0 to 42 degrees Celsius
액추에이터Differential-drive round wheeled chassis with independent suspension and 350 W x 2 drive motors
전원
배터리 지속 시간up to 10 h
센싱 & 컴퓨팅
센서LiDAR, depth camera, IMU, wheel odometry, safety bumper strip
소프트웨어 / AIGC Robotics software platform providing map building, autonomous navigation, task scheduling, system configuration, remote monitoring and OTA firmware updates, with ROS support, open APIs, SDKs and a web-based management platform
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

자주 묻는 질문

What is the GC Robotics C30?

The C30 is the smallest of GC Robotics' indoor platforms and the only round one — a 500 mm cylinder just 225 mm tall, weighing 30 kg. The shape is functional rather than stylistic: a circular footprint rotating in place cannot catch a corner, which is what lets it work aisles as narrow as 70 cm.

Who makes the GC Robotics C30?

The GC Robotics C30 is made by GC Robotics, a robotics company based in China.

How much does the GC Robotics C30 cost?

GC Robotics has not publicly announced pricing for the GC Robotics C30. You can enquire through RobotAIGeek for current pricing.

What is the GC Robotics C30 used for?

The GC Robotics C30 is designed for 점검, 운반, warehouse automation, and hospital service robots. It is used in 연구, 헬스케어, 창고·물류, and 리테일 settings.

What is the payload capacity of the GC Robotics C30?

The GC Robotics C30 has a payload capacity of 40 kg.

How much does the GC Robotics C30 weigh?

The GC Robotics C30 weighs 30 kg.

How fast is the GC Robotics C30?

The GC Robotics C30 can move at speeds of up to 3.6 km/h.

What is the battery life of the GC Robotics C30?

The GC Robotics C30 runs for up to 10 h on a charge.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

GC Robotics C30 대체 로봇 →

최신 로봇 소식을 매주 받아보시겠어요?