★尚未評分

Automatic Mold Transfer System

AMRChinaChina
Automatic Mold Transfer System
比較
行業:
暫無
用途:
價格:
尚未公布

描述

Automatic Mold Transfer System是Lonyu Agv的AMR。 面向運輸設計。 關鍵數據:2200 kg、負載 10000 kg。

The Automatic Mold Transfer System is a Automatic Mold Transfer System built by Lonyu AGV, rated to carry 10 t. It has a body measuring 2580 mm long, 1600 mm wide and 675 mm high and an unladen mass of 2.2 t. Mechanically, suspension is spring. Lonyu describes its movement as: manual remote control + self-operation. It navigates by magnetic strip, laser SLAM, qr code. From Lonyu's product page: Automatic Mold Transfer System AGV for Industrial Handling. The AGV trolley runs along the transfer trolley channel to transport the mold from the smelting area to the sand dropping area, and a mold buffer area is set in the middle after the mold is lifted away, a signal is given to transport the pallet back to the smelting area to wait.

功能特色

  • Rated load: 10 t
  • Unladen mass: 2.2 t
  • Body dimensions: 2580 x 1600 x 675 mm
  • Drive type: super drive
  • Navigation: magnetic strip, laser SLAM, QR code
  • Suspension: spring
  • Turning radius: 1500
  • Linkage mode: single vehicle
  • Explosion-proof: no

技術規格

已驗證
物理參數
重量2200 kg
外形尺寸L 2.58 m × W 1.6 m × H 675 mm
負載10000 kg
來源:製造商官網來源:第三方暫無來源來源狀態基於該機器人已登記的資料來源。

機器人論壇

正在載入論壇...

常見問題

What is the Automatic Mold Transfer System?

The Automatic Mold Transfer System is a Automatic Mold Transfer System built by Lonyu AGV, rated to carry 10 t. It has a body measuring 2580 mm long, 1600 mm wide and 675 mm high and an unladen mass of 2.2 t. Mechanically, suspension is spring. Lonyu describes its movement as: manual remote control + self-operation.

Who makes the Automatic Mold Transfer System?

The Automatic Mold Transfer System is made by Lonyu Agv, a robotics company based in China.

How much does the Automatic Mold Transfer System cost?

Lonyu Agv has not publicly announced pricing for the Automatic Mold Transfer System. You can enquire through RobotAIGeek for current pricing.

What is the Automatic Mold Transfer System used for?

The Automatic Mold Transfer System is designed for 運輸.

What is the payload capacity of the Automatic Mold Transfer System?

The Automatic Mold Transfer System has a payload capacity of 10,000 kg.

How much does the Automatic Mold Transfer System weigh?

The Automatic Mold Transfer System weighs 2,200 kg.

與同類機器人對比

看看這款機器人與最接近的同類產品相比表現如何

Automatic Mold Transfer System 的替代選擇 →

相關機器人

查看更多 >

訂閱獲取最新機器人資訊?