RobotAIGeek
★尚未评分

Open arm-HT

High Torque Technology
Collaborative-RobotChinaChina已发布
Open arm-HT
对比
来源：
github.com
行业：
研究教育制造业
用途：
拾放研究Dual-arm manipulation researchteleoperated data collectionembodied-AI traininglaboratory automation
价格：
未公布

描述

Open arm-HT is High Torque's seven-degree-of-freedom arm, sold as a pair on a shared column so that the two arms work as one dual-arm cell: 689 mm from the mount to the tip at zero position, 1,596 mm of wingspan across the pair. Each arm weighs 6 kg and lifts 5 kg, and the redundant seventh axis is what makes it worth the extra joint — a 7-DoF arm can reach the same point through many different elbow poses, which is how it works around obstacles that would stop a six-axis machine. Peak joint torque is 60 N·m and the end effector moves at up to 3.6 m/s, well above the six-axis Panthera-HT, so it suits dynamic manipulation and teleoperated data collection rather than slow positioning alone. All seven joints run on CAN FD using the same HTDW module family as the rest of the High Torque ecosystem.

功能特点

  • 7 DoF per arm plus a gripper motor, sold as a synchronised left/right pair on a shared column
  • 689 mm sag size at zero position and 1,596 mm dual-arm wingspan
  • 6 kg per arm carrying 5 kg maximum load
  • 60 N·m peak joint torque
  • 3.6 m/s maximum end-effector speed
  • CAN FD communication
  • redundant seventh axis for obstacle-avoiding elbow poses
  • documented joint ranges (-180° to +90°, -15° to +195°, ±90°, -60° to +130°, ±90°, ±45°, ±90°)
  • built from HTDW-7535, 6036, 5036 and 4438 joint modules shared across the High Torque ecosystem
  • official Python SDK with Pinocchio kinematics, full dynamics compensation, QP inverse kinematics, trajectory record and playback, and Meta Quest VR teleoperation.

技术规格

物理参数
重量6 kg
外形尺寸W 1.6 m
负载5 kg
臂展689 mm
移动能力
运动类型文具
自由度7
速度12.96 km/h
操作能力高
执行器7 joints per arm using HTDW-7535-02-CNE, HTDW-6036-02-CNE, HTDW-6036-02-DNE, HTDW-5036-02-DNE, HTDW-4438-30-NE-JC and HTDW-4438-30-NE modules; 60 N·m peak torque; mounted in pairs on a shared column
感知与计算
传感器joint position sensing on all seven axes
连接方式CAN FD
软件 / AIOfficial openarm_HT Python SDK: left-arm, right-arm and synchronised dual-arm control; position, velocity, torque, position-velocity and MIT five-parameter control modes; Pinocchio forward kinematics, inverse kinematics and Jacobians; gravity, friction, Coriolis, mass-matrix and full dynamics compensation; quintic and septic polynomial interpolation with Cartesian trajectories; QP inverse kinematics under joint position, velocity and acceleration constraints; single- and dual-arm trajectory recording, history selection and MIT playback; keyboard Cartesian control and Meta Quest VR DLS/QP teleoperation; YAML joint-limit and URDF configuration.
来源：制造商官网来源：第三方暂无来源来源状态基于该机器人已登记的资料来源。

常见问题

What is the Open arm-HT?

Open arm-HT is High Torque's seven-degree-of-freedom arm, sold as a pair on a shared column so that the two arms work as one dual-arm cell: 689 mm from the mount to the tip at zero position, 1,596 mm of wingspan across the pair.

Who makes the Open arm-HT?

The Open arm-HT is made by High Torque Technology, a robotics company based in China.

How much does the Open arm-HT cost?

High Torque Technology has not publicly announced pricing for the Open arm-HT. You can enquire through RobotAIGeek for current pricing.

What is the Open arm-HT used for?

The Open arm-HT is designed for 拾放, 研究, dual-arm manipulation research, and teleoperated data collection. It is used in 研究, 教育, and 制造业 settings.

What is the payload capacity of the Open arm-HT?

The Open arm-HT has a payload capacity of 5 kg and a reach of 689 mm.

How much does the Open arm-HT weigh?

The Open arm-HT weighs 6 kg.

How fast is the Open arm-HT?

The Open arm-HT can move at speeds of up to 12.96 km/h.

How many degrees of freedom does the Open arm-HT have?

The Open arm-HT has 7 degrees of freedom.

与同类机器人对比

看看这款机器人与最接近的同类产品相比表现如何

Open arm-HT 的替代选择 →

订阅获取最新机器人资讯？