Enterprise Release Notes: Skydio X2E (May 2023)

Skydio is proud to announce new and enhanced features in our November 2022 software release. 0:00 Introduction 0:15 Obstacle Avoidance Enhancements 1:00 Stop at Structure 1:26 Speed Improvements 1:50 Find Subject in Scout 2:10 Crosshair Coordinates 3:23 Subject Tracking Improvements 3:45 (3D Scan) Indoor Capture 4:29 (3D Scan) Improved Scanning 5:00 (Skydio Cloud) Pilot Controlled Adaptive Bitrate 5:30 (Skydio Cloud) Media Sync Over Ethernet 5:53 Conclusion About the features: Stop at Structure Perform finer, more controlled inspections with Stop at Structure. When your drone is within 13 ft (4 m) of an obstacle, it will not deviate from its course. Instead, it will reduce speed and maintain position, allowing for more precise maneuvering in the immediate vicinity of the structure. Scout - Find Subject A new setting toggle in the Scout Skill allows users to display the Show Find subject button. Toggle on, and the Find tracked subject button will display on the fly screen. The drone will yaw, and the gimbal will pitch to locate the tracked GPS subject (Skydio Enterprise Controller or Beacon). GPS Weak Altitude Limit A new safety measure that prevents flight above 33 ft (10 m) outdoors and 66 feet (20 m) indoors when GPS is weak. The menu replaces the Indoor Height Ceiling toggle in the Flight Limits menu. Toggling OFF disables the altitude limit, and your drone will fly using only the vision navigation. To reduce the risk of an emergency landing maintain a flight path near surfaces and objects. Obstacle Avoidance Enhancements To improve your flying experience, we have adjusted Obstacle Avoidance margins and behaviors to allow for more flexibility and safety while flying. Skydio X2E will now use visual navigation and AI to dynamically and temporarily reduce obstacle avoidance margins when moving through narrow spaces. Skydio will also dynamically expand margins if the drone detects environmental dangers like the wind. Speed Improvements The maximum forward spee