설명
WIRobotics ALLEX은(는) WIRobotics의 Humanoid입니다. 개발, 자재 취급, 연구 용도로 설계되었습니다. 주요 수치: 가반 하중 30 kg.
ALLEX is WIRobotics' general-purpose humanoid, and the name is a contraction of ALL EXperiences — the company's argument being that a robot learns the world by touching it. Everything in the design follows from that: the arms, hands, neck and waist are compliant by construction, so the robot absorbs a knock and keeps going instead of resisting it or faulting out. The hands are the centrepiece. Each has 15 degrees of freedom in roughly the size of a human hand, repeats to 0.5 mm at the fingertip, pushes at least 40 N there, and can lift over 30 kg. It also detects about 100 gf of force without a force sensor, inferring it from the drive — delicate enough to feel a light touch while still being able to carry a load. That combination is possible because of the actuators. WIRobotics quotes roughly a tenth the friction and a twenty-fourth the rotational inertia of commercial units, which makes the joints highly backdrivable — you can push them and they give — and keeps the simulation-to-reality gap small, since a low-friction joint behaves much more like its model. A whole arm including the hand weighs about 9 kg, with the mass kept close to the body. Control runs at 20 kHz over EtherCAT with whole-body gravity compensation, so the robot holds itself up and interacts by force rather than by position. WIRobotics aims it at everything from delicate manipulation to heavy, high-impact work; the machine carries KOREATECH branding alongside its own.
주요 기능
- General-purpose humanoid built around whole-body compliance in arms, hands, neck and waist
- Hands with 15 degrees of freedom each, in a human-hand form factor
- Fingertip repeatability 0.5 mm or better
- Maximum fingertip force 40 N or more
- Lifting capacity over 30 kg per hand
- Sensorless force detection down to about 100 gf
- Custom actuators: about 1/10 the friction and 1/24 the rotational inertia of commercial units
- High backdrivability and low distal mass, minimising the sim-to-real gap
- Whole arm including hand weighs about 9 kg
- Whole-body gravity compensation for safe force-based interaction
- 20 kHz real-time torque control loop over high-speed EtherCAT
- Unified motor control algorithm across the machine
- Designed for both delicate manipulation and heavy, high-impact tasks
기술 사양
검증됨| 물리 사양 | |
| 가반하중 | 30 kg |
|---|---|
| 반복 정밀도 | ±0.5 mm |
| 이동성 | |
| 이동 방식 | 휴머노이드 |
| 작동 환경 | Research and real-world task settings, from delicate manipulation to high-impact work |
| 센싱 & 컴퓨팅 | |
| 센서 | sensorless force detection to about 100 gf, head camera array |
| 연결성 | High-speed EtherCAT |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 가반하중 | 30 kg |
|---|---|
| 반복 정밀도 | ±0.5 mm |
| 이동성 | |
| 이동 방식 | 휴머노이드 |
| 작동 환경 | Research and real-world task settings, from delicate manipulation to high-impact work |
| 센싱 & 컴퓨팅 | |
| 센서 | sensorless force detection to about 100 gf, head camera array |
| 연결성 | High-speed EtherCAT |
이미지

이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the WIRobotics ALLEX?
ALLEX is WIRobotics' general-purpose humanoid, and the name is a contraction of ALL EXperiences — the company's argument being that a robot learns the world by touching it.
Who makes the WIRobotics ALLEX?
The WIRobotics ALLEX is made by WIRobotics, a robotics company based in South Korea.
How much does the WIRobotics ALLEX cost?
WIRobotics has not publicly announced pricing for the WIRobotics ALLEX. You can enquire through RobotAIGeek for current pricing.
What is the WIRobotics ALLEX used for?
The WIRobotics ALLEX is designed for 개발, 자재 취급, and 연구. It is used in 연구, 헬스케어, and 제조 settings.
What is the payload capacity of the WIRobotics ALLEX?
The WIRobotics ALLEX has a payload capacity of 30 kg.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- WIRobotics ALLEX vs Xynova Prima 1
- WIRobotics ALLEX vs HMND 01 Alpha Bipedal
- WIRobotics ALLEX vs TRI Punyo
- WIRobotics ALLEX vs Tokyo Robotics Torobo
- WIRobotics ALLEX vs Dexmate Vega





