설명
TN10 Pro은(는) Sparkoz의 Cleaning-Robots입니다. 청소, Autonomous commercial floor scrubbing, sweeping and vacuuming 용도로 설계되었습니다. 주요 수치: 26 kg.
The TN10 Pro is Sparkoz's compact autonomous floor-cleaning robot, a 4-in-1 machine that scrubs, sweeps, vacuums and dust-mops in tight spaces such as offices, shops and grocery aisles. Its 420 mm-wide body carries dual roller brushes that scrub at 0.56 psi over a 350 mm path with a 400 mm squeegee, cleans right to the edge, and keeps dry debris and wastewater apart with Sparkoz's patented separation system; it covers up to 756 m2 an hour. Solid-state LiDAR SLAM and a 3D time-of-flight sensor handle mapping, localisation and obstacle avoidance, and its AI recognises stain types, adapts routes to foot traffic and flags anomalies, which Sparkoz says cuts manual intervention by up to 80%. Paired with its auto dock and mobile water station it charges, refills, drains and washes its rollers unattended; setup takes about five minutes and rollers, side brushes and bins swap without tools. It weighs 26 kg, measures 520 x 420 x 490 mm, carries 10-litre fresh and dirty tanks and a 20 Ah battery, climbs 10% slopes in transit (6% while cleaning) and runs below 65 dB(A).
주요 기능
- 4-in-1: scrubbing, sweeping, vacuuming and dust mopping
- Cleaning productivity up to 756 m2/h (8,138 ft2/h)
- Compact 420 mm-wide body
- 350 mm scrubbing width, 400 mm squeegee
- Dual roller brushes at 0.56 psi
- zero-edge cleaning
- Patented dry/wet debris separation
- 10 L fresh / 10 L dirty water tanks
- 20 Ah battery
- Solid-state LiDAR SLAM + 3D ToF vision sensor
- AI stain recognition and foot-traffic-aware route planning
- Auto dock + mobile water station: charging, refill, draining and roller washing
- 5-minute setup
- tool-free roller, side-brush and bin replacement
- Gradeability 10% transport / 6% cleaning
- below 65 dB(A)
기술 사양
검증됨| 물리 사양 | |
| 무게 | 26 kg |
|---|---|
| 크기 | L 520 mm × W 420 mm × H 490 mm |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 작동 환경 | Indoor commercial floors |
| 센싱 & 컴퓨팅 | |
| 센서 | solid-state LiDAR, 3D ToF vision sensor |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 26 kg |
|---|---|
| 크기 | L 520 mm × W 420 mm × H 490 mm |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 작동 환경 | Indoor commercial floors |
| 센싱 & 컴퓨팅 | |
| 센서 | solid-state LiDAR, 3D ToF vision sensor |
이미지





이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the TN10 Pro?
The TN10 Pro is Sparkoz's compact autonomous floor-cleaning robot, a 4-in-1 machine that scrubs, sweeps, vacuums and dust-mops in tight spaces such as offices, shops and grocery aisles.
Who makes the TN10 Pro?
The TN10 Pro is made by Sparkoz, a robotics company based in China.
How much does the TN10 Pro cost?
Sparkoz has not publicly announced pricing for the TN10 Pro. You can enquire through RobotAIGeek for current pricing.
What is the TN10 Pro used for?
The TN10 Pro is designed for 청소 and autonomous commercial floor scrubbing, sweeping and vacuuming. It is used in 상업, 시설, 공항, and 청소·시설 관리 settings.
How much does the TN10 Pro weigh?
The TN10 Pro weighs 26 kg.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- TN10 Pro vs ECOVACS DEEBOT PRO M1 3D
- TN10 Pro vs Allybot-C2
- TN10 Pro vs Allybot-C2 Pro
- TN10 Pro vs Allybot-C3 Mini
- TN10 Pro vs RAPiiTT









