RobotAIGeek
★評価はまだありません

TN10 Pro

Cleaning-RobotsChinaChinaリリース済み
TN10 Pro
比較
情報源:
用途:
清掃Autonomous commercial floor scrubbing, sweeping and vacuuming
価格:
未発表
モデル:
Sparkoz TN10 Pro compact autonomous floor scrubber

説明

TN10 ProはSparkozのCleaning-Robotsです。 清掃、Autonomous commercial floor scrubbing, sweeping and vacuuming向けに設計されています。 主な数値:26 kg。

The TN10 Pro is Sparkoz's compact autonomous floor-cleaning robot, a 4-in-1 machine that scrubs, sweeps, vacuums and dust-mops in tight spaces such as offices, shops and grocery aisles. Its 420 mm-wide body carries dual roller brushes that scrub at 0.56 psi over a 350 mm path with a 400 mm squeegee, cleans right to the edge, and keeps dry debris and wastewater apart with Sparkoz's patented separation system; it covers up to 756 m2 an hour. Solid-state LiDAR SLAM and a 3D time-of-flight sensor handle mapping, localisation and obstacle avoidance, and its AI recognises stain types, adapts routes to foot traffic and flags anomalies, which Sparkoz says cuts manual intervention by up to 80%. Paired with its auto dock and mobile water station it charges, refills, drains and washes its rollers unattended; setup takes about five minutes and rollers, side brushes and bins swap without tools. It weighs 26 kg, measures 520 x 420 x 490 mm, carries 10-litre fresh and dirty tanks and a 20 Ah battery, climbs 10% slopes in transit (6% while cleaning) and runs below 65 dB(A).

特長

  • 4-in-1: scrubbing, sweeping, vacuuming and dust mopping
  • Cleaning productivity up to 756 m2/h (8,138 ft2/h)
  • Compact 420 mm-wide body
  • 350 mm scrubbing width, 400 mm squeegee
  • Dual roller brushes at 0.56 psi
  • zero-edge cleaning
  • Patented dry/wet debris separation
  • 10 L fresh / 10 L dirty water tanks
  • 20 Ah battery
  • Solid-state LiDAR SLAM + 3D ToF vision sensor
  • AI stain recognition and foot-traffic-aware route planning
  • Auto dock + mobile water station: charging, refill, draining and roller washing
  • 5-minute setup
  • tool-free roller, side-brush and bin replacement
  • Gradeability 10% transport / 6% cleaning
  • below 65 dB(A)

技術仕様

検証済み
本体
重量26 kg
寸法L 520 mm × W 420 mm × H 490 mm
移動性能
移動方式車輪型
使用環境Indoor commercial floors
センシング・演算
センサーsolid-state LiDAR, 3D ToF vision sensor
メーカー情報第三者情報情報源なし情報源のステータスは、このロボットに登録された情報源に基づきます。

ロボットフォーラム

フォーラムを読み込み中...

よくある質問

What is the TN10 Pro?

The TN10 Pro is Sparkoz's compact autonomous floor-cleaning robot, a 4-in-1 machine that scrubs, sweeps, vacuums and dust-mops in tight spaces such as offices, shops and grocery aisles.

Who makes the TN10 Pro?

The TN10 Pro is made by Sparkoz, a robotics company based in China.

How much does the TN10 Pro cost?

Sparkoz has not publicly announced pricing for the TN10 Pro. You can enquire through RobotAIGeek for current pricing.

What is the TN10 Pro used for?

The TN10 Pro is designed for 清掃 and autonomous commercial floor scrubbing, sweeping and vacuuming. It is used in 商業, 施設, 空港, and 清掃・施設管理 settings.

How much does the TN10 Pro weigh?

The TN10 Pro weighs 26 kg.

類似ロボットと比較

このロボットが最も近い代替候補とどう比べられるかをご覧ください

TN10 Pro の代替候補 →

関連ロボット

もっと見る >

最新ロボット情報を毎週ニュースレターで受け取りませんか?