ROBO Fork15

Nakanishi Metal Works (NKC)

Industrial-Robot Japan

Japan출시됨

★아직 평가 없음

비교

출처:

robofork.kolec.co.jp

산업:

창고·물류 제조

용도:

사내 물류 적재 자재 취급 팔레트 운반 하역Unmanned pallet transport and stacking

가격:

미공개

모델:

NKC KOLEC ROBO Fork15 autonomous forklift (1.5 t)

설명

ROBO Fork15은(는) Nakanishi Metal Works (NKC)의 Industrial-Robot입니다. 사내 물류, 적재, 자재 취급 용도로 설계되었습니다. 주요 수치: 1915 kg, 가동 시간 300분, 가반 하중 1500 kg.

ROBO Fork15 is NKC's driverless forklift for carrying pallets of up to 1,500 kg inside factories and warehouses. It navigates by mapping with no guide wires or tracks, routes are set and changed on a PC, and one PC manages several forklifts over a wireless link. Laser range finders front and rear scan 360 degrees for localisation and slow or stop the truck near people and obstacles; three emergency-stop buttons, bumper switches, a fall-prevention sensor and pallet-presence and pallet-hole sensors complete the safety kit. NKC has added a pallet-width sensor that slides the forks to fit different pallets, depth sensing for unmanned stacking, a floor-projected safety zone and a melody warning sound. The truck is 2,520 mm long, 970 mm wide and 1,820 mm tall with forks lowered, weighs about 1,915 kg, lifts to 2,500 mm and travels at 60 m/min with +/-15 mm repeat stop accuracy. A 24 V / 201 Ah battery runs about 5 hours and charges in 3-4 hours; an automatic charger and other fork sizes are options. NKC builds each installation to order around the customer's loads.

주요 기능

1,500 kg capacity
2,500 mm lift height
forks 920 mm long, 450 (600) mm wide
5-degree tilt
Mapping navigation - no guide wires
routes set and changed on a PC
one PC manages a fleet
Front and rear laser range finders, 360-degree detection with automatic slow-down and stop
Auto fork-width adjustment to the pallet
depth sensing for unmanned stacking
Floor-projected safety zone, melody warning sound, relocated stack light
2,520 x 970 x 1,820 mm
about 1,915 kg
60 m/min
R1,545 mm turning radius
+/-15 mm repeat stop accuracy
4 mm steps / 2% grades
24 V / 201 Ah battery
about 5 h running
3-4 h charge
automatic charger optional

기술 사양

검증됨

물리 사양
무게	1915 kg
크기	L 2.52 m × W 970 mm × H 1.82 m
가반하중	1500 kg
반복 정밀도	±15 mm
이동성
이동 방식	바퀴형
속도	3.6 km/h
작동 환경	Indoor factories and warehouses on firm, flat floors (0-40 C, 20-80% RH)
액추에이터	Inverter-controlled drive; FET-chopper lift control
전원
배터리 지속 시간	300 min
충전 방식	Stationary manual charger; automatic charger optional
센싱 & 컴퓨팅
센서	Laser range finders front and rear (360 degrees), pallet-hole and pallet-presence sensors, fall-prevention sensor, bumper switch
연결성	Wireless LAN
소프트웨어 / AI	NKC PC route-setting and fleet management

제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

기술 사양

검증됨

물리 사양
무게	1915 kg
크기	L 2.52 m × W 970 mm × H 1.82 m
가반하중	1500 kg
반복 정밀도	±15 mm
이동성
이동 방식	바퀴형
속도	3.6 km/h
작동 환경	Indoor factories and warehouses on firm, flat floors (0-40 C, 20-80% RH)
액추에이터	Inverter-controlled drive; FET-chopper lift control
전원
배터리 지속 시간	300 min
충전 방식	Stationary manual charger; automatic charger optional
센싱 & 컴퓨팅
센서	Laser range finders front and rear (360 degrees), pallet-hole and pallet-presence sensors, fall-prevention sensor, bumper switch
연결성	Wireless LAN
소프트웨어 / AI	NKC PC route-setting and fleet management