설명
FX10은(는) MAXAGV의 Industrial-Robot입니다. 사내 물류, 리프팅, 자재 취급 용도로 설계되었습니다. 주요 수치: 가반 하중 1000 kg.
The FX10 is a popular compact fork-over AGV for Euro pallet and container handling. Its modular design takes various mast types and fork lengths, or even a roller bed, and it lifts loads of up to 1,000 kg to 4,500 mm for pallet handling in small aisles and marshalling lanes.\nLike all MAXAGV vehicles it navigates mainly by laser, carries a personal-safety system of emergency stops, safety laser scanners, side edges and bumpers to ISO 3691-4:2020, and runs under the Max software platform with opportunity charging when idle. Options include barcode and RFID readers and MAXAGV's DeZone and Blue Point accessories.
주요 기능
- Modular: various masts, fork lengths or a roller bed
- Fork-over design for small aisles and marshalling lanes
- Unit load: Open entry: EUR pallet - container - roll cage
- Maximum weight: 1000 kg
- Transfer/lift height: 85 - 4500 mm
- Battery: Wet lead-acid, gel or lithium-ion
- Charging: Opportunity charging, fast charge or battery exchange
- Options: barcode scanner - RFID - DeZone - Blue Point
- Laser navigation as standard
- magnetic, optical or wire guidance where required
- Personal safety system: emergency stops, front/rear safety laser scanners, side edges and bumpers
- ISO 3691-4:2020
- Sonix on-board controller
- managed by the Max software platform
기술 사양
검증됨| 물리 사양 | |
| 가반하중 | 1000 kg |
|---|---|
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 작동 환경 | Indoor production, warehouses and distribution centres |
| 센싱 & 컴퓨팅 | |
| 센서 | safety laser scanners, navigation laser, bumpers and safety edges |
| 연결성 | Max software platform (fleet control) |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 가반하중 | 1000 kg |
|---|---|
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 작동 환경 | Indoor production, warehouses and distribution centres |
| 센싱 & 컴퓨팅 | |
| 센서 | safety laser scanners, navigation laser, bumpers and safety edges |
| 연결성 | Max software platform (fleet control) |
이미지





이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the FX10?
The FX10 is a popular compact fork-over AGV for Euro pallet and container handling. Its modular design takes various mast types and fork lengths, or even a roller bed, and it lifts loads of up to 1,000 kg to 4,500 mm for pallet handling in small aisles and marshalling lanes.\nLike all MAXAGV vehicles it navigates mainl…
Who makes the FX10?
The FX10 is made by MAXAGV, a robotics company based in Sweden.
How much does the FX10 cost?
MAXAGV has not publicly announced pricing for the FX10. You can enquire through RobotAIGeek for current pricing.
What is the FX10 used for?
The FX10 is designed for 사내 물류, 리프팅, 자재 취급, and 팔레트 운반. It is used in 창고·물류 and 제조 settings.
What is the payload capacity of the FX10?
The FX10 has a payload capacity of 1,000 kg.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- FX10 vs Yale MC10-15 Robotic Counterbalanced Stacker
- FX10 vs ROBO Fork15
- FX10 vs YL14.1
- FX10 vs YL14
- FX10 vs Novus Carry









