설명
Rail-Mounted Inspection Robot (MR200 / HR200)은(는) Hangcha의 Security입니다. 점검, 모니터링, 순찰 용도로 설계되었습니다.
Hangcha's rail-mounted inspection robots run on overhead rails to patrol utility tunnels, power rooms and equipment halls around the clock. The MR200 draws power from a sliding contact line for uninterrupted 24/7 inspection. A 2D laser stops it and raises an alarm if something blocks the route, a two-section flexible chassis takes 300 mm-radius curves, and a four-section folding arm covers equipment in 2.4 m cabinets. The HR200 is a smaller, lighter version that runs at up to 2.5 m/s, takes 600 mm-radius turns and climbs up to 90 degrees. It charges at distributed stations and keeps inspecting offline when the network drops. A companion rail-mounted firefighting robot works with the inspection robots to put out fires in spaces up to 60 cubic metres. The robots come from Guozi Robotics, a Hangcha Intelligent subsidiary.
주요 기능
- MR200: Powered by sliding contact line, supporting 24/7 uninterrupted inspection
- MR200: Safety protection is provided by a 2D laser module. When an obstacle is detected on the inspection route that prevents safe passage, the system can automatically stop and issue an alarm
- MR200: The chassis adopts a two-section flexible chassis, which has strong cornering ability and a turning radius of 300mm, truly achieving seamless testing in special and complex environments
- MR200: The robotic arm employs a four-section folding arm structure, ensuring smooth and stable operation. It can achieve seamless coverage of all equipment within the 2.4m cabinet, significantly improving the comprehensiveness and precision of the operation
- HR200: The new miniaturized and lightweight design improves implementation efficiency
- HR200: With a maximum operating speed of 2.5 m/s, it improves product inspection efficiency and rapid response capabilities
- HR200: With a minimum turning radius of 600mm and a maximum climbing ability of 90°, it can be applied to a variety of complex environments
- HR200: Distributed autonomous charging design enables charging at the nearest location
- HR200: Supports offline robot inspection, independent operation without network, and resume data transmission after network interruption, ensuring that inspection tasks can be executed normally and data can be reliably transmitted even in environments with unstable or no network
- Rail-mounted firefighting robot: Independent system: Independent control system, communication system, and operational capabilities
- Rail-mounted firefighting robot: Intelligent linkage: It can link with a rail-mounted intelligent inspection robot to autonomously extinguish fires at designated points
- Rail-mounted firefighting robot: Highly efficient fire suppression: Fire suppression can protect spaces up to 60m³
기술 사양
검증됨| 이동성 | |
| 이동 방식 | 기타 |
|---|---|
| 속도 | 9 km/h |
| 작동 환경 | Utility tunnels, power rooms and equipment halls (overhead rail) |
| 전원 | |
| 충전 방식 | Sliding contact line (MR200); distributed autonomous charging (HR200) |
| 센싱 & 컴퓨팅 | |
| 센서 | 2D laser obstacle detection, inspection cameras on folding arm |
기술 사양
검증됨| 이동성 | |
| 이동 방식 | 기타 |
|---|---|
| 속도 | 9 km/h |
| 작동 환경 | Utility tunnels, power rooms and equipment halls (overhead rail) |
| 전원 | |
| 충전 방식 | Sliding contact line (MR200); distributed autonomous charging (HR200) |
| 센싱 & 컴퓨팅 | |
| 센서 | 2D laser obstacle detection, inspection cameras on folding arm |
이미지
martti
martti
martti이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Rail-Mounted Inspection Robot (MR200 / HR200)?
Hangcha's rail-mounted inspection robots run on overhead rails to patrol utility tunnels, power rooms and equipment halls around the clock. The MR200 draws power from a sliding contact line for uninterrupted 24/7 inspection.
Who makes the Rail-Mounted Inspection Robot (MR200 / HR200)?
The Rail-Mounted Inspection Robot (MR200 / HR200) is made by Hangcha, a robotics company based in China.
How much does the Rail-Mounted Inspection Robot (MR200 / HR200) cost?
Hangcha has not publicly announced pricing for the Rail-Mounted Inspection Robot (MR200 / HR200). You can enquire through RobotAIGeek for current pricing.
What is the Rail-Mounted Inspection Robot (MR200 / HR200) used for?
The Rail-Mounted Inspection Robot (MR200 / HR200) is designed for 점검, 모니터링, 순찰, and ceiling-rail inspection robots for 24/7 patrols of utility tunnels and equipment rooms. It is used in 에너지 and 제조 settings.
How fast is the Rail-Mounted Inspection Robot (MR200 / HR200)?
The Rail-Mounted Inspection Robot (MR200 / HR200) can move at speeds of up to 9 km/h.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Rail-Mounted Inspection Robot (MR200 / HR200) vs PIR-300
- Rail-Mounted Inspection Robot (MR200 / HR200) vs PIR-TS210
- Rail-Mounted Inspection Robot (MR200 / HR200) vs PIR-TS400
- Rail-Mounted Inspection Robot (MR200 / HR200) vs PIR-DS400
- Rail-Mounted Inspection Robot (MR200 / HR200) vs PIR-DS200
