설명
PadBot E0a은(는) PadBot의 Educational-Robots입니다. 개발, 매핑, 내비게이션 용도로 설계되었습니다. 주요 수치: 4.5 kg.
The PadBot E0a is an entry-level, open-source ROS robot for teaching and research in university and school labs. It carries a lidar for mapping and navigation, a 3D depth camera, a six-microphone far-field array and a 7-inch IPS touch screen, and comes with ROS teaching material covering SLAM mapping, fixed-point and multipoint navigation, dynamic obstacle avoidance, route planning and Python programming. Vision routines include colour-block following, KCF target tracking, AR-tag following and face recognition and tracking, with deep-learning image analysis, while a separate voice routine adds voice recognition, synthesis, control and navigation. The controller board uses a 32-bit ARM Cortex-M4 MCU with onboard IMU, CAN, serial, SWD and a 6-way PWM servo interface that can drive a 6-DOF arm. It measures 288 x 240 x 205 mm, weighs 4.5 kg, moves at 0.48 m/s on 100 mm tyres and runs on a 12 V 10,000 mAh battery.
주요 기능
- ROS teaching platform with SLAM mapping, fixed-point and multipoint navigation, dynamic obstacle avoidance
- Lidar: measuring radius >= 12 m, >= 8000 samples/s, >= 5.5 Hz scan
- 3D depth camera (depth 1280x1024, video 1920x1080, 0.6-8 m)
- Colour-block follow, KCF target tracking, AR-tag follow, face recognition and tracking
- Voice recognition, synthesis, control and navigation
- six-mic far-field array
- 3 W speaker
- 7-inch IPS capacitive touch screen, 1024x600
- 32-bit ARM Cortex-M4 MCU (up to 150 MHz)
- onboard IMU
- CAN, TTL serial, SWD
- 6-way PWM servo interface for a 6-DOF arm
- Movement speed 0.48 m/s
- 100 mm tyres
- 12 V 10,000 mAh battery
- 7-24 V input
기술 사양
검증됨| 물리 사양 | |
| 무게 | 4.5 kg |
|---|---|
| 크기 | L 205 mm × W 288 mm × H 240 mm |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 1.73 km/h |
| 작동 환경 | Indoor labs and classrooms |
| 전원 | |
| 배터리 지속 시간 | 12 V 10000 mAh |
| 센싱 & 컴퓨팅 | |
| 센서 | LiDAR, 3D depth camera, six-microphone far-field array, IMU |
| 소프트웨어 / AI | ROS; Python |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 4.5 kg |
|---|---|
| 크기 | L 205 mm × W 288 mm × H 240 mm |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 1.73 km/h |
| 작동 환경 | Indoor labs and classrooms |
| 전원 | |
| 배터리 지속 시간 | 12 V 10000 mAh |
| 센싱 & 컴퓨팅 | |
| 센서 | LiDAR, 3D depth camera, six-microphone far-field array, IMU |
| 소프트웨어 / AI | ROS; Python |
이미지



이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the PadBot E0a?
The PadBot E0a is an entry-level, open-source ROS robot for teaching and research in university and school labs. It carries a lidar for mapping and navigation, a 3D depth camera, a six-microphone far-field array and a 7-inch IPS touch screen, and comes with ROS teaching material covering SLAM mapping, fixed-point and m…
Who makes the PadBot E0a?
The PadBot E0a is made by PadBot, a robotics company based in China.
How much does the PadBot E0a cost?
PadBot has not publicly announced pricing for the PadBot E0a. You can enquire through RobotAIGeek for current pricing.
What is the PadBot E0a used for?
The PadBot E0a is designed for 개발, 매핑, 내비게이션, and 연구. It is used in 연구 and 교육 settings.
How much does the PadBot E0a weigh?
The PadBot E0a weighs 4.5 kg.
How fast is the PadBot E0a?
The PadBot E0a can move at speeds of up to 1.73 km/h.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- PadBot E0a vs Mecabot 2
- PadBot E0a vs Mecabot Pro
- PadBot E0a vs Mecabot Plus
- PadBot E0a vs Mecabot X
- PadBot E0a vs Rosbot Pro








