설명
Outdoor Magnetic-Nail Inertia Tugger AGV은(는) OKAGV의 Industrial-Robot입니다. 중량물 운반, 자재 취급, 운반 용도로 설계되었습니다. 주요 수치: 가반 하중 6000 kg.
OKAGV's Outdoor Magnetic-Nail Inertia Tugger AGV is the towing robot OKAGV recommends for outdoor routes: it follows magnetic nails buried in the ground using inertial guidance, so there is no tape or marking on the surface to wear away. It tows trolley trains of 3,000, 4,000, 5,000 or 6,000 kg, hooking the first trolley automatically, at up to 50 m/min (20 m/min in turns) on a 4-motor steering-wheel drive with +/-10 mm accuracy; the standard body is about 1000 x 500 x 1000 mm and weighs no more than 1,000 kg. It uses lead-acid or lithium batteries (more than 1,500 cycles) with manual or automatic charging and is protected by an obstacle sensor and bumper; OKAGV says it should not be run in rain.
주요 기능
- Tows 3,000 / 4,000 / 5,000 / 6,000 kg
- Outdoor use on buried magnetic nails (inertial guidance)
- Automatic hook on the first trolley
- Max speed 50 m/min
- 20 m/min turning
- 4-motor steering-wheel drive
- +/-10 mm accuracy
- Body about 1000 x 500 x 1000 mm (customised)
- weight <= 1,000 kg
- Lead-acid or lithium battery, > 1,500 cycles
- Not for use in rain (per OKAGV)
기술 사양
검증됨| 물리 사양 | |
| 크기 | L 1 m × W 500 mm × H 1 m |
|---|---|
| 가반하중 | 6000 kg |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 2.99 km/h |
| 작동 환경 | Outdoor factory roads and yards on buried magnetic nails (not in rain) |
| 전원 | |
| 배터리 지속 시간 | Lead-acid or lithium, > 1,500 cycles |
| 센싱 & 컴퓨팅 | |
| 센서 | magnetic nail sensor, gyroscope, obstacle safety sensor, bumper |
| 연결성 | Wireless LAN (optional) |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 크기 | L 1 m × W 500 mm × H 1 m |
|---|---|
| 가반하중 | 6000 kg |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 2.99 km/h |
| 작동 환경 | Outdoor factory roads and yards on buried magnetic nails (not in rain) |
| 전원 | |
| 배터리 지속 시간 | Lead-acid or lithium, > 1,500 cycles |
| 센싱 & 컴퓨팅 | |
| 센서 | magnetic nail sensor, gyroscope, obstacle safety sensor, bumper |
| 연결성 | Wireless LAN (optional) |
이미지


이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Outdoor Magnetic-Nail Inertia Tugger AGV?
OKAGV's Outdoor Magnetic-Nail Inertia Tugger AGV is the towing robot OKAGV recommends for outdoor routes: it follows magnetic nails buried in the ground using inertial guidance, so there is no tape or marking on the surface to wear away.
Who makes the Outdoor Magnetic-Nail Inertia Tugger AGV?
The Outdoor Magnetic-Nail Inertia Tugger AGV is made by OKAGV, a robotics company based in China.
How much does the Outdoor Magnetic-Nail Inertia Tugger AGV cost?
OKAGV has not publicly announced pricing for the Outdoor Magnetic-Nail Inertia Tugger AGV. You can enquire through RobotAIGeek for current pricing.
What is the Outdoor Magnetic-Nail Inertia Tugger AGV used for?
The Outdoor Magnetic-Nail Inertia Tugger AGV is designed for 중량물 운반, 자재 취급, 운반, and intralogistics. It is used in 창고·물류 and 제조 settings.
What is the payload capacity of the Outdoor Magnetic-Nail Inertia Tugger AGV?
The Outdoor Magnetic-Nail Inertia Tugger AGV has a payload capacity of 6,000 kg.
How fast is the Outdoor Magnetic-Nail Inertia Tugger AGV?
The Outdoor Magnetic-Nail Inertia Tugger AGV can move at speeds of up to 2.99 km/h.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Outdoor Magnetic-Nail Inertia Tugger AGV vs VNE30
- Outdoor Magnetic-Nail Inertia Tugger AGV vs VNE35
- Outdoor Magnetic-Nail Inertia Tugger AGV vs EffiBOT-T
- Outdoor Magnetic-Nail Inertia Tugger AGV vs iSAGEBOT Composite Robot
- Outdoor Magnetic-Nail Inertia Tugger AGV vs iSAGEBOT Forklift Robot





