RobotAIGeek
★Noch nicht bewertet

Outdoor Magnetic-Nail Inertia Tugger AGV

Industrial-RobotChinaChinaVeröffentlicht
Outdoor Magnetic-Nail Inertia Tugger AGV
Vergleichen
Quellen:
Preis:
Nicht angekündigt
Modell:
OKAGV outdoor magnetic nail inertia tugger autonomous mobile robot

BESCHREIBUNG

Outdoor Magnetic-Nail Inertia Tugger AGV ist ein Industrial-Robot von OKAGV. Er ist für Schwerlasttransport, Materialhandhabung, Transport ausgelegt. Eckdaten: 6000 kg Traglast.

OKAGV's Outdoor Magnetic-Nail Inertia Tugger AGV is the towing robot OKAGV recommends for outdoor routes: it follows magnetic nails buried in the ground using inertial guidance, so there is no tape or marking on the surface to wear away. It tows trolley trains of 3,000, 4,000, 5,000 or 6,000 kg, hooking the first trolley automatically, at up to 50 m/min (20 m/min in turns) on a 4-motor steering-wheel drive with +/-10 mm accuracy; the standard body is about 1000 x 500 x 1000 mm and weighs no more than 1,000 kg. It uses lead-acid or lithium batteries (more than 1,500 cycles) with manual or automatic charging and is protected by an obstacle sensor and bumper; OKAGV says it should not be run in rain.

FUNKTIONEN

  • Tows 3,000 / 4,000 / 5,000 / 6,000 kg
  • Outdoor use on buried magnetic nails (inertial guidance)
  • Automatic hook on the first trolley
  • Max speed 50 m/min
  • 20 m/min turning
  • 4-motor steering-wheel drive
  • +/-10 mm accuracy
  • Body about 1000 x 500 x 1000 mm (customised)
  • weight <= 1,000 kg
  • Lead-acid or lithium battery, > 1,500 cycles
  • Not for use in rain (per OKAGV)

TECHNISCHE DATEN

Verifiziert
Physisch
AbmessungenL 1 m × W 500 mm × H 1 m
Traglast6000 kg
Mobilität
BewegungsartRadbasiert
Geschwindigkeit2.99 km/h
EinsatzumgebungOutdoor factory roads and yards on buried magnetic nails (not in rain)
Energie
AkkulaufzeitLead-acid or lithium, > 1,500 cycles
Sensorik & Rechenleistung
Sensorenmagnetic nail sensor, gyroscope, obstacle safety sensor, bumper
KonnektivitätWireless LAN (optional)
HerstellerangabeDrittquelleOhne QuelleDer Quellenstatus basiert auf den angegebenen Quellen dieses Roboters.

ROBOTER-FOREN

Foren werden geladen...

HÄUFIG GESTELLTE FRAGEN

What is the Outdoor Magnetic-Nail Inertia Tugger AGV?

OKAGV's Outdoor Magnetic-Nail Inertia Tugger AGV is the towing robot OKAGV recommends for outdoor routes: it follows magnetic nails buried in the ground using inertial guidance, so there is no tape or marking on the surface to wear away.

Who makes the Outdoor Magnetic-Nail Inertia Tugger AGV?

The Outdoor Magnetic-Nail Inertia Tugger AGV is made by OKAGV, a robotics company based in China.

How much does the Outdoor Magnetic-Nail Inertia Tugger AGV cost?

OKAGV has not publicly announced pricing for the Outdoor Magnetic-Nail Inertia Tugger AGV. You can enquire through RobotAIGeek for current pricing.

What is the Outdoor Magnetic-Nail Inertia Tugger AGV used for?

The Outdoor Magnetic-Nail Inertia Tugger AGV is designed for schwerlasttransport, materialhandhabung, transport, and intralogistics. It is used in lager & logistik and fertigung settings.

What is the payload capacity of the Outdoor Magnetic-Nail Inertia Tugger AGV?

The Outdoor Magnetic-Nail Inertia Tugger AGV has a payload capacity of 6,000 kg.

How fast is the Outdoor Magnetic-Nail Inertia Tugger AGV?

The Outdoor Magnetic-Nail Inertia Tugger AGV can move at speeds of up to 2.99 km/h.

MIT ÄHNLICHEN ROBOTERN VERGLEICHEN

Sehen Sie, wie sich dieser Roboter gegenüber seinen nächsten Alternativen schlägt

Alternativen zu Outdoor Magnetic-Nail Inertia Tugger AGV →

ÄHNLICHE ROBOTER

MEHR ANZEIGEN >

WÖCHENTLICHE NEWS ZU DEN NEUESTEN ROBOTER-UPDATES ERHALTEN?