★아직 평가 없음

Neuromeka Indy7 V3

Collaborative-RobotSouth KoreaSouth Korea출시됨
Neuromeka Indy7 V3
비교

설명

Neuromeka Indy7 V3은(는) Neuromeka의 Collaborative-Robot입니다. 조립, 머신 텐딩, 자재 취급 용도로 설계되었습니다. 주요 수치: 34 kg, 가반 하중 7 kg, 도달 범위 1210 mm, 6 자유도.

The Indy7 V3 is Neuromeka's flagship collaborative arm, pitched as the first industrial robot a small or mid-sized manufacturer buys. It carries 7 kg on six revolute joints, reaches 1,210 mm at full stretch with an 800 mm working envelope, repeats to 0.1 mm and weighs 34 kg. What makes it usable without a robotics engineer is the control. Collision detection is sensorless — inferred from the drives rather than from an added force sensor — and impedance control lets the arm give way rather than fight, which is what makes direct teaching safe: you grab the arm, move it where you want, and it remembers. Programming runs from a tablet app, online or offline. Every joint turns plus or minus 360 degrees, the first three at 150 deg/s and the wrist three at 180 deg/s, for a 1 m/s tool speed. The body is rated IP54, and an expansion port at the wrist takes grippers, vision and other standard tools. The Pro version adds Neuromeka's IndyEye vision system.

주요 기능

  • 6 revolute degrees of freedom, 7 kg payload
  • Maximum reach 1,210 mm, working envelope 800 mm
  • Repeatability 0.1 mm, weight 34 kg
  • All joints rotate plus or minus 360 degrees
  • Joint speeds: J1-J3 150 deg/s, J4-J6 180 deg/s
  • tool speed 1 m/s
  • IP54
  • Sensorless collision detection with impedance control
  • Direct teaching by hand
  • tablet teach-pendant app for online and offline programming
  • Wrist expansion port for grippers, vision sensors and other standard tools
  • Indy7 Pro variant adds the IndyEye vision system

기술 사양

검증됨
물리 사양
무게34 kg
가반하중7 kg
도달거리1.21 m
반복 정밀도±0.1 mm
이동성
이동 방식고정형
자유도6
속도1 km/h
작동 환경Factory floors alongside people; IP54
센싱 & 컴퓨팅
연결성Sensorless collision detection and impedance control; direct teaching; online and offline programming from the CONTY tablet teach-pendant app; IndyCARE remote management
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the Neuromeka Indy7 V3?

The Indy7 V3 is Neuromeka's flagship collaborative arm, pitched as the first industrial robot a small or mid-sized manufacturer buys. It carries 7 kg on six revolute joints, reaches 1,210 mm at full stretch with an 800 mm working envelope, repeats to 0.1 mm and weighs 34 kg.

Who makes the Neuromeka Indy7 V3?

The Neuromeka Indy7 V3 is made by Neuromeka, a robotics company based in South Korea.

How much does the Neuromeka Indy7 V3 cost?

Neuromeka has not publicly announced pricing for the Neuromeka Indy7 V3. You can enquire through RobotAIGeek for current pricing.

What is the Neuromeka Indy7 V3 used for?

The Neuromeka Indy7 V3 is designed for 조립, 머신 텐딩, 자재 취급, and 픽앤플레이스. It is used in 자동차, 전자, and 제조 settings.

What is the payload capacity of the Neuromeka Indy7 V3?

The Neuromeka Indy7 V3 has a payload capacity of 7 kg and a reach of 1.21 m.

How much does the Neuromeka Indy7 V3 weigh?

The Neuromeka Indy7 V3 weighs 34 kg.

How fast is the Neuromeka Indy7 V3?

The Neuromeka Indy7 V3 can move at speeds of up to 1 km/h.

How many degrees of freedom does the Neuromeka Indy7 V3 have?

The Neuromeka Indy7 V3 has 6 degrees of freedom.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

Neuromeka Indy7 V3 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?