설명
M3 Low-Profile Lifting Transport Robot은(는) Marorobottech의 Industrial-Robot입니다. 사내 물류, 리프팅, 자재 취급 용도로 설계되었습니다. 주요 수치: 가동 시간 480분, 가반 하중 500 kg.
The M3 Low-Profile Lift Type is Marorobottech's dedicated transport robot for carts whose low ground clearance makes them hard to get underneath. It lifts loads of 200-500 kg, and a special wing-type lift keeps off-centre loads from slipping or being set down wrongly; through customisation it handles a variety of standard and non-standard carts and routes. It navigates by 2D LiDAR SLAM, needs no infrastructure changes, lifts 120-180 mm depending on size and runs as a header differential-drive vehicle on slopes of up to 2 degrees. It runs up to 8 hours, recharges in up to 2 hours and positions to ±1 cm and ±1 degree. It is managed by Marorobottech's Robot Control System (RCS) fleet software, which integrates with MES and WMS, and can be deployed without stopping the production line.
주요 기능
- Transports low-clearance carts, including non-standard ones
- Payload 200-500 kg
- Wing-type lift resolves off-centre loads
- Lift height 120-180 mm
- 2D LiDAR SLAM navigation, no infrastructure changes
- Header differential-drive
- slopes up to 2 degrees
- Up to 8 h runtime
- charges in up to 2 h
- RCS fleet software with MES/WMS integration
기술 사양
검증됨| 물리 사양 | |
| 크기 | L 2 m × W 1 m × H 820 mm |
|---|---|
| 가반하중 | 500 kg |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 2.7 km/h |
| 작동 환경 | Indoor factories, production lines and warehouses |
| 전원 | |
| 배터리 지속 시간 | 480 min |
| 센싱 & 컴퓨팅 | |
| 센서 | 2D LiDAR |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 크기 | L 2 m × W 1 m × H 820 mm |
|---|---|
| 가반하중 | 500 kg |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 2.7 km/h |
| 작동 환경 | Indoor factories, production lines and warehouses |
| 전원 | |
| 배터리 지속 시간 | 480 min |
| 센싱 & 컴퓨팅 | |
| 센서 | 2D LiDAR |
이미지
martti
martti
martti
martti
martti이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the M3 Low-Profile Lifting Transport Robot?
The M3 Low-Profile Lift Type is Marorobottech's dedicated transport robot for carts whose low ground clearance makes them hard to get underneath.
Who makes the M3 Low-Profile Lifting Transport Robot?
The M3 Low-Profile Lifting Transport Robot is made by Marorobottech, a robotics company based in South Korea.
How much does the M3 Low-Profile Lifting Transport Robot cost?
Marorobottech has not publicly announced pricing for the M3 Low-Profile Lifting Transport Robot. You can enquire through RobotAIGeek for current pricing.
What is the M3 Low-Profile Lifting Transport Robot used for?
The M3 Low-Profile Lifting Transport Robot is designed for 사내 물류, 리프팅, 자재 취급, and 운반. It is used in 창고·물류 and 제조 settings.
What is the payload capacity of the M3 Low-Profile Lifting Transport Robot?
The M3 Low-Profile Lifting Transport Robot has a payload capacity of 500 kg.
How fast is the M3 Low-Profile Lifting Transport Robot?
The M3 Low-Profile Lifting Transport Robot can move at speeds of up to 2.7 km/h.
What is the battery life of the M3 Low-Profile Lifting Transport Robot?
The M3 Low-Profile Lifting Transport Robot runs for about 480 minutes on a charge.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- M3 Low-Profile Lifting Transport Robot vs Bosch Rexroth ACTIVE Shuttle
- M3 Low-Profile Lifting Transport Robot vs Wonik Robotics WR300CV
- M3 Low-Profile Lifting Transport Robot vs Wonik Robotics WR300CB
- M3 Low-Profile Lifting Transport Robot vs Wonik Robotics WR300LF
- M3 Low-Profile Lifting Transport Robot vs Wonik Robotics WR600LF
