M3 Low-Profile Lifting Transport Robot
BESCHREIBUNG
M3 Low-Profile Lifting Transport Robot ist ein Industrial-Robot von Marorobottech. Er ist für Intralogistik, Heben, Materialhandhabung ausgelegt. Eckdaten: 480 min Laufzeit, 500 kg Traglast.
The M3 Low-Profile Lift Type is Marorobottech's dedicated transport robot for carts whose low ground clearance makes them hard to get underneath. It lifts loads of 200-500 kg, and a special wing-type lift keeps off-centre loads from slipping or being set down wrongly; through customisation it handles a variety of standard and non-standard carts and routes. It navigates by 2D LiDAR SLAM, needs no infrastructure changes, lifts 120-180 mm depending on size and runs as a header differential-drive vehicle on slopes of up to 2 degrees. It runs up to 8 hours, recharges in up to 2 hours and positions to ±1 cm and ±1 degree. It is managed by Marorobottech's Robot Control System (RCS) fleet software, which integrates with MES and WMS, and can be deployed without stopping the production line.
FUNKTIONEN
- Transports low-clearance carts, including non-standard ones
- Payload 200-500 kg
- Wing-type lift resolves off-centre loads
- Lift height 120-180 mm
- 2D LiDAR SLAM navigation, no infrastructure changes
- Header differential-drive
- slopes up to 2 degrees
- Up to 8 h runtime
- charges in up to 2 h
- RCS fleet software with MES/WMS integration
TECHNISCHE DATEN
Verifiziert| Physisch | |
| Abmessungen | L 2 m × W 1 m × H 820 mm |
|---|---|
| Traglast | 500 kg |
| Mobilität | |
| Bewegungsart | Radbasiert |
| Geschwindigkeit | 2.7 km/h |
| Einsatzumgebung | Indoor factories, production lines and warehouses |
| Energie | |
| Akkulaufzeit | 480 min |
| Sensorik & Rechenleistung | |
| Sensoren | 2D LiDAR |
ROBOTER-FOREN
Foren werden geladen...
TECHNISCHE DATEN
Verifiziert| Physisch | |
| Abmessungen | L 2 m × W 1 m × H 820 mm |
|---|---|
| Traglast | 500 kg |
| Mobilität | |
| Bewegungsart | Radbasiert |
| Geschwindigkeit | 2.7 km/h |
| Einsatzumgebung | Indoor factories, production lines and warehouses |
| Energie | |
| Akkulaufzeit | 480 min |
| Sensorik & Rechenleistung | |
| Sensoren | 2D LiDAR |
Bilder
martti
martti
martti
martti
marttiBildbeiträge
Videos
ROBOTER-FOREN
Foren werden geladen...
BEWERTUNGEN
HÄUFIG GESTELLTE FRAGEN
What is the M3 Low-Profile Lifting Transport Robot?
The M3 Low-Profile Lift Type is Marorobottech's dedicated transport robot for carts whose low ground clearance makes them hard to get underneath.
Who makes the M3 Low-Profile Lifting Transport Robot?
The M3 Low-Profile Lifting Transport Robot is made by Marorobottech, a robotics company based in South Korea.
How much does the M3 Low-Profile Lifting Transport Robot cost?
Marorobottech has not publicly announced pricing for the M3 Low-Profile Lifting Transport Robot. You can enquire through RobotAIGeek for current pricing.
What is the M3 Low-Profile Lifting Transport Robot used for?
The M3 Low-Profile Lifting Transport Robot is designed for intralogistik, heben, materialhandhabung, and transport. It is used in lager & logistik and fertigung settings.
What is the payload capacity of the M3 Low-Profile Lifting Transport Robot?
The M3 Low-Profile Lifting Transport Robot has a payload capacity of 500 kg.
How fast is the M3 Low-Profile Lifting Transport Robot?
The M3 Low-Profile Lifting Transport Robot can move at speeds of up to 2.7 km/h.
What is the battery life of the M3 Low-Profile Lifting Transport Robot?
The M3 Low-Profile Lifting Transport Robot runs for about 480 minutes on a charge.
MIT ÄHNLICHEN ROBOTERN VERGLEICHEN
Sehen Sie, wie sich dieser Roboter gegenüber seinen nächsten Alternativen schlägt
- M3 Low-Profile Lifting Transport Robot vs Bosch Rexroth ACTIVE Shuttle
- M3 Low-Profile Lifting Transport Robot vs Wonik Robotics WR300CV
- M3 Low-Profile Lifting Transport Robot vs Wonik Robotics WR300CB
- M3 Low-Profile Lifting Transport Robot vs Wonik Robotics WR300LF
- M3 Low-Profile Lifting Transport Robot vs Wonik Robotics WR600LF
