설명
Hero PRO은(는) Open Bionics의 End-Effectors입니다. 의료 보조, 재활, 도우미 용도로 설계되었습니다. 주요 수치: 0.5 kg, 가반 하중 25.9 kg.
Hero PRO is Open Bionics' lightweight waterproof bionic hand, 3D printed from tough Nylon PA12. Open Bionics says it is the lightest hand system available, with a full system weight of 1.21 lb including hand, battery, cables, wrist and EMG sensors. Its miniaturised battery sits inside the hand, lasts a day on one 4-hour charge and charges over USB-C. The whole prosthesis is IPX7 water-resistant. The fingers close in 0.6 seconds, and a patented single-motor thumb drives seven grip modes, including a precision key grip. More grips arrive through wireless updates via the Sidekick app. It carries up to 57 lb, twice the previous-generation Hero ARM. The wrist flexes manually 45 degrees each way and rotates a full 360 degrees. A touchscreen fingertip works on phones, and a USMC-standard wrist connector swaps the hand for more than 50 activity attachments.
주요 기능
- Full system weight 1.21 lb
- IPX7 water-resistant system
- Finger closing 0.6 s
- 7 grip modes incl. precision key grip
- Patented single-motor powered thumb
- Carry load up to 57 lb
- Wrist flex/extend 45/45 degrees, 360 degree rotation
- Battery integrated in hand, USB-C charging
- Touchscreen-compatible fingertip
- USMC-standard wrist connector for Activity Attachments
기술 사양
검증됨| 물리 사양 | |
| 무게 | 0.549 kg |
|---|---|
| 가반하중 | 25.9 kg |
| 이동성 | |
| 이동 방식 | 기타 |
| 작동 환경 | Worn daily by people with below-elbow limb differences, IPX7 |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 0.549 kg |
|---|---|
| 가반하중 | 25.9 kg |
| 이동성 | |
| 이동 방식 | 기타 |
| 작동 환경 | Worn daily by people with below-elbow limb differences, IPX7 |
이미지
martti
martti
martti
martti이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Hero PRO?
Hero PRO is Open Bionics' lightweight waterproof bionic hand, 3D printed from tough Nylon PA12. Open Bionics says it is the lightest hand system available, with a full system weight of 1.21 lb including hand, battery, cables, wrist and EMG sensors.
Who makes the Hero PRO?
The Hero PRO is made by Open Bionics, a robotics company based in United Kingdom.
How much does the Hero PRO cost?
Open Bionics has not publicly announced pricing for the Hero PRO. You can enquire through RobotAIGeek for current pricing.
What is the Hero PRO used for?
The Hero PRO is designed for 의료 보조, 재활, and 도우미. It is used in 헬스케어 and 가정 settings.
What is the payload capacity of the Hero PRO?
The Hero PRO has a payload capacity of 25.9 kg.
How much does the Hero PRO weigh?
The Hero PRO weighs 0.55 kg.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Hero PRO vs MANIFESTO Fingers
- Hero PRO vs MANIFESTO Hand 3.0
- Hero PRO vs MANIFESTO Hand
- Hero PRO vs Hero RGD
- Hero PRO vs INDY Hand
