★아직 평가 없음

Grenzebach FF1200S

Industrial-RobotGermanyGermany출시됨
Grenzebach FF1200S
비교

설명

Grenzebach FF1200S은(는) Grenzebach의 Industrial-Robot입니다. 사내 물류, 자재 취급, 운반 용도로 설계되었습니다. 주요 수치: 가반 하중 1200 kg.

The FF1200S is Grenzebach's automated forklift, built specifically around the Euro pallet. It lifts to about 1,200 mm and carries roughly 1,200 kg — up to 1,500 kg on request — so it handles the pallet work that would otherwise tie up a driver. It runs at up to 2 m/s and turns inside a 1,450 mm radius, which is what makes it usable in real aisles rather than purpose-built ones. Free contour navigation means no magnetic tape, reflectors or floor infrastructure to install, and no safety zones to mark out; two certified safety laser scanners cover the vehicle in shared traffic. Positioning is typically accurate to about plus or minus 15 mm. At 1,725 by 800 by 1,950 mm it is the tallest of the three Grenzebach AGVs, and the company sells it as a module that drops into an existing intralogistics setup — optionally with its drive-range monitoring and autonomous goods-carrier detection.

주요 기능

  • Automated forklift AGV built for Euro pallets and similar goods carriers
  • Payload approx. 1,200 kg, up to 1,500 kg on request
  • Maximum lifting height approx. 1,200 mm
  • Dimensions 1,725 x 800 x 1,950 mm (L/W/H)
  • Speed up to 2 m/s
  • Turning radius 1,450 mm
  • Positioning accuracy approx. +/-15 mm typical
  • Two certified safety laser scanners
  • Free contour navigation — no safety areas or floor infrastructure to install
  • Optional autonomous load-carrier detection and drive-range monitoring

기술 사양

검증됨
물리 사양
크기L 1.73 m × W 800 mm × H 1.95 m
가반하중1200 kg
반복 정밀도±15 mm
이동성
이동 방식바퀴형
속도7.2 km/h
작동 환경Indoor factory and warehouse floors in shared traffic; no floor infrastructure required
센싱 & 컴퓨팅
센서two certified safety laser scanners, contour-navigation sensing
소프트웨어 / AIGrenzebach fleet manager, warehouse control system, security manager and statistics
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the Grenzebach FF1200S?

The FF1200S is Grenzebach's automated forklift, built specifically around the Euro pallet. It lifts to about 1,200 mm and carries roughly 1,200 kg — up to 1,500 kg on request — so it handles the pallet work that would otherwise tie up a driver.

Who makes the Grenzebach FF1200S?

The Grenzebach FF1200S is made by Grenzebach, a robotics company based in Germany.

How much does the Grenzebach FF1200S cost?

Grenzebach has not publicly announced pricing for the Grenzebach FF1200S. You can enquire through RobotAIGeek for current pricing.

What is the Grenzebach FF1200S used for?

The Grenzebach FF1200S is designed for 사내 물류, 자재 취급, and 운반. It is used in 자동차, 창고·물류, and 제조 settings.

What is the payload capacity of the Grenzebach FF1200S?

The Grenzebach FF1200S has a payload capacity of 1,200 kg.

How fast is the Grenzebach FF1200S?

The Grenzebach FF1200S can move at speeds of up to 7.2 km/h.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

Grenzebach FF1200S 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?