설명
The DNSYS Z1 addresses the knee rather than the hip, which makes it a descent-and-load device as much as a climbing one: it takes up to 200 percent of body weight off the knees, where most of the damage from carrying a pack downhill is done. Two 900 W motors supply around a 50 percent boost to muscle power, and the whole assembly weighs 680 grams - light enough that it does not itself become the load. AI motion support reads the wearer's movement and adjusts assistance continuously rather than by fixed setting. Two trims are sold, the Z1 Dual Joint and the Z1 Dual Joint Pro, and the Z1 can be paired with the DNSYS X1 hip exoskeleton for full-leg assistance. DNSYS quotes the Z1 Pro at 50 percent more power per step, roughly 44 lb of felt weight removed on a climb, and additional hiking and vertical range.
주요 기능
- Two 900 W high-power motors
- Removes up to 200 percent of body weight from the knees
- Around 50 percent boost to muscle power
- 680 g ultra-lightweight assembly
- AI intelligent motion support with continuous adjustment
- Two trims: Z1 Dual Joint and Z1 Dual Joint Pro
- Can be combined with the DNSYS X1 hip exoskeleton for full-leg support
- Suited to descent and load carrying as well as climbing
기술 사양
검증됨| 물리 사양 | |
| 무게 | 680 g |
|---|---|
| 이동성 | |
| 이동 방식 | 기타 |
| 조작 능력 | 낮음 |
| 작동 환경 | Worn on the body outdoors and indoors - trails, slopes, stairs and everyday walking. |
| 센싱 & 컴퓨팅 | |
| 연결성 | App control |
기술 사양
검증됨| 물리 사양 | |
| 무게 | 680 g |
|---|---|
| 이동성 | |
| 이동 방식 | 기타 |
| 조작 능력 | 낮음 |
| 작동 환경 | Worn on the body outdoors and indoors - trails, slopes, stairs and everyday walking. |
| 센싱 & 컴퓨팅 | |
| 연결성 | App control |
이미지
이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Dnsys Z1 Knee Exoskeleton?
The DNSYS Z1 addresses the knee rather than the hip, which makes it a descent-and-load device as much as a climbing one: it takes up to 200 percent of body weight off the knees, where most of the damage from carrying a pack downhill is done.
Who makes the Dnsys Z1 Knee Exoskeleton?
The Dnsys Z1 Knee Exoskeleton is made by Dnsys, a robotics company based in China.
How much does the Dnsys Z1 Knee Exoskeleton cost?
The Dnsys Z1 Knee Exoskeleton is priced at around $1,099.
What is the Dnsys Z1 Knee Exoskeleton used for?
The Dnsys Z1 Knee Exoskeleton is designed for 보조 and 도우미. It is used in 소비자, 레저·관광, and 헬스케어 settings.
How much does the Dnsys Z1 Knee Exoskeleton weigh?
The Dnsys Z1 Knee Exoskeleton weighs 0.68 kg.
When was the Dnsys Z1 Knee Exoskeleton released?
The Dnsys Z1 Knee Exoskeleton was released in 2026.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Dnsys Z1 Knee Exoskeleton vs Hypershell X Go
- Dnsys Z1 Knee Exoskeleton vs Hypershell X Pro
- Dnsys Z1 Knee Exoskeleton vs Hypershell X Carbon
- Dnsys Z1 Knee Exoskeleton vs Hypershell X Ultra
- Dnsys Z1 Knee Exoskeleton vs Hypershell X Pro S