설명
The Ascentiz H Pro is a wearable hip exoskeleton for hiking and everyday movement, claiming to make each stride feel about 40 percent lighter. Peak boost is 1,000 W over a 15.5-mile range, in a carbon-fibre-reinforced frame weighing 5.5 lb. Two practical details separate it from heavier rivals: it runs at 35 dB or under, quiet enough not to announce itself, and it goes on in about five seconds, which is the difference between a device that gets worn and one that stays in the bag. Its AI OmniTerrain system identifies the ground underfoot and adapts assistance across twelve terrain types rather than running one profile everywhere. The H Pro is CSA certified to industrial-grade reliability standards, and fits wearers from 5 feet 1 inch to 6 feet 6 inches.
주요 기능
- 1,000 W peak boost - about 40 percent less effort per stride
- 15.5-mile range
- 5.5 lb lightweight carbon-fibre-reinforced frame
- 35 dB or quieter operation
- 5-second grab-and-go setup
- AI OmniTerrain adapting across 12 terrain types
- CSA certified to industrial-grade reliability standards
- Fits 5'1" to 6'6" height, 25.6" to 57.1" waist, 15.7" to 31.5" thigh
- Swappable battery with portable carry case
기술 사양
검증됨| 물리 사양 | |
| 무게 | 5.5 lbs (2.5 kg) |
|---|---|
| 소재 | Carbon fibre reinforced polymer |
| 이동성 | |
| 이동 방식 | 기타 |
| 조작 능력 | 낮음 |
| 작동 환경 | Worn on the body outdoors and indoors - trails, slopes, stairs and everyday walking. |
| 센싱 & 컴퓨팅 | |
| 연결성 | App control |
기술 사양
검증됨| 물리 사양 | |
| 무게 | 5.5 lbs (2.5 kg) |
|---|---|
| 소재 | Carbon fibre reinforced polymer |
| 이동성 | |
| 이동 방식 | 기타 |
| 조작 능력 | 낮음 |
| 작동 환경 | Worn on the body outdoors and indoors - trails, slopes, stairs and everyday walking. |
| 센싱 & 컴퓨팅 | |
| 연결성 | App control |
이미지
이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Ascentiz H Pro?
The Ascentiz H Pro is a wearable hip exoskeleton for hiking and everyday movement, claiming to make each stride feel about 40 percent lighter. Peak boost is 1,000 W over a 15.5-mile range, in a carbon-fibre-reinforced frame weighing 5.5 lb.
Who makes the Ascentiz H Pro?
The Ascentiz H Pro is made by Ascentiz, a robotics company based in China.
How much does the Ascentiz H Pro cost?
The Ascentiz H Pro is priced at around $1,299.
What is the Ascentiz H Pro used for?
The Ascentiz H Pro is designed for 보조 and 도우미. It is used in 소비자, 레저·관광, and 헬스케어 settings.
How much does the Ascentiz H Pro weigh?
The Ascentiz H Pro weighs 2.5 kg.
When was the Ascentiz H Pro released?
The Ascentiz H Pro was released in 2026.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Ascentiz H Pro vs Hypershell X Go
- Ascentiz H Pro vs Hypershell X Pro
- Ascentiz H Pro vs Hypershell X Carbon
- Ascentiz H Pro vs Hypershell X Ultra
- Ascentiz H Pro vs Hypershell X Pro S