설명
Aerones Crawler Gen 3은(는) Aerones의 Mobile-Robots입니다. 데이터 수집, 매핑, 점검 용도로 설계되었습니다. 주요 수치: 2025년 출시.
Crawler Gen 3 is Aerones' third-generation robot for inspecting wind turbine blades from the inside. It drives into the hollow blade from the root and records the interior, with a 3D lidar scanner that maps the structure and localises defects, a front-facing 360° 5K camera for full surface coverage and a dedicated 61 MP camera for automated defect detection in the root zone. Adaptive LED lighting gives bright, even illumination, distance-travel tracking logs exactly where each defect sits, and updated motor control keeps the crawl smooth and steady. The modular design has a longer battery life than earlier crawlers, and the robot can inspect during turbine operation or before commissioning, feeding its data into Aerones' visual inspection software. Aerones introduced it in May 2025.
주요 기능
- 3D lidar scanner for 3D mapping and defect localisation
- Front-facing 360° camera with 5K resolution
- Dedicated 61 MP root-zone camera for automated defect detection
- Adaptive LED lighting
- Distance-travel tracking to log defect positions
- Extended battery life
- modular, robust design
- Updated motor control for smooth inspection movement
- Inspects during operation or pre-commissioning
- data to Aerones inspection software
기술 사양
검증됨| 이동성 | |
| 이동 방식 | 바퀴형 |
|---|---|
| 작동 환경 | Inside wind turbine blades |
| 센싱 & 컴퓨팅 | |
| 센서 | 3D lidar, 360° 5K camera, 61 MP root-zone camera, distance tracking |
| 소프트웨어 / AI | Aerones visual inspection platform |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 이동성 | |
| 이동 방식 | 바퀴형 |
|---|---|
| 작동 환경 | Inside wind turbine blades |
| 센싱 & 컴퓨팅 | |
| 센서 | 3D lidar, 360° 5K camera, 61 MP root-zone camera, distance tracking |
| 소프트웨어 / AI | Aerones visual inspection platform |
이미지
martti
martti
martti이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Aerones Crawler Gen 3?
Crawler Gen 3 is Aerones' third-generation robot for inspecting wind turbine blades from the inside. It drives into the hollow blade from the root and records the interior, with a 3D lidar scanner that maps the structure and localises defects, a front-facing 360° 5K camera for full surface coverage and a dedicated 61 M…
Who makes the Aerones Crawler Gen 3?
The Aerones Crawler Gen 3 is made by Aerones, a robotics company based in Latvia.
How much does the Aerones Crawler Gen 3 cost?
Aerones has not publicly announced pricing for the Aerones Crawler Gen 3. You can enquire through RobotAIGeek for current pricing.
What is the Aerones Crawler Gen 3 used for?
The Aerones Crawler Gen 3 is designed for 데이터 수집, 매핑, 점검, and internal blade inspection for commissioning, end-of-warranty and condition monitoring. It is used in 에너지 settings.
When was the Aerones Crawler Gen 3 released?
The Aerones Crawler Gen 3 was released in 2025.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Aerones Crawler Gen 3 vs PIR-TS210
- Aerones Crawler Gen 3 vs PIR-TS400
- Aerones Crawler Gen 3 vs PIR-DS400
- Aerones Crawler Gen 3 vs PIR-LX001
- Aerones Crawler Gen 3 vs JOBOT
