説明
The Hypershell X Go is the entry point to the range: 400 W of hip assistance across six intelligent modes, in the same 2 kg folding frame as the rest of the line. Two motors at the hips are driven by Hypershell's AI MotionEngine, which reads more than a dozen sensors - IMUs, gyroscopes, accelerometers and barometers - to track the wearer in three dimensions and vary power stride by stride rather than pushing at a fixed rate. One 72 Wh battery is included, good for about 15 km, and it can be carried onto an aircraft because it sits below the 100 Wh cabin limit. It is IP54 rated and specified to -10 degrees Celsius. Hypershell is explicit that this is not a medical device: it is for people who can already walk independently. The X Go has since been discontinued in favour of the newer X Series S models.
特長
- 400 W of hip assistance
- 6 intelligent assistance modes
- About 15 km of range per battery
- 2 kg ultra-light foldable design
- AI MotionEngine driving two hip motors
- Over a dozen sensors including IMUs, gyroscopes and barometers
- 72 Wh / 5000 mAh swappable battery, under the airline carry-on limit
- IP54 dust and water resistance
- Rated for cold operation down to -10 degrees Celsius
- One battery included
- Not a medical device - for users who can walk independently
技術仕様
検証済み| 本体 | |
| 重量 | 2 kg |
|---|---|
| 移動性能 | |
| 移動方式 | その他 |
| マニピュレーション | 低 |
| 使用環境 | Worn on the body outdoors and indoors - trails, slopes, stairs and everyday walking. |
| 電源 | |
| バッテリー駆動時間 | 72 Wh (5000 mAh) |
| センシング・演算 | |
| センサー | IMU, Gyroscope, Accelerometer, Barometer |
| 接続性 | Phone app control |
技術仕様
検証済み| 本体 | |
| 重量 | 2 kg |
|---|---|
| 移動性能 | |
| 移動方式 | その他 |
| マニピュレーション | 低 |
| 使用環境 | Worn on the body outdoors and indoors - trails, slopes, stairs and everyday walking. |
| 電源 | |
| バッテリー駆動時間 | 72 Wh (5000 mAh) |
| センシング・演算 | |
| センサー | IMU, Gyroscope, Accelerometer, Barometer |
| 接続性 | Phone app control |
画像
投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the Hypershell X Go?
The Hypershell X Go is the entry point to the range: 400 W of hip assistance across six intelligent modes, in the same 2 kg folding frame as the rest of the line.
Who makes the Hypershell X Go?
The Hypershell X Go is made by Hypershell, a robotics company based in China.
How much does the Hypershell X Go cost?
The Hypershell X Go is priced at around $699.
What is the Hypershell X Go used for?
The Hypershell X Go is designed for アシスト and お手伝い. It is used in コンシューマー, レジャー・観光, and 医療 settings.
How much does the Hypershell X Go weigh?
The Hypershell X Go weighs 2 kg.
When was the Hypershell X Go released?
The Hypershell X Go was released in 2025.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
Hypershell X Go の代替候補 →