説明
EROLLER 8はOppentのIndustrial-Robotです。 構内物流、マテリアルハンドリング、搬送向けに設計されています。 主な数値：350 kg、稼働時間 540 分、可搬質量 150 kg。
EROLLER 8 is a model in Oppent's EROLLER family of autonomous mobile robots, built in Italy. Its omnidirectional drive lets it line its 800 mm-high roller deck up precisely with conveyors to transfer loads up to 150 kg.\nPer its datasheet it measures 1,400 x 662 x 850 mm, weighs 350 kg without batteries and carries 150 kg nominal (180 kg maximum) on powered roller deck 855 x 655 mm at 800 mm height. It uses double-trike omnidirectional drive (2 x 300 W), travels at up to 1.0 m/s and climbs 3% slopes. It navigates naturally by laser scanner, positions to +/-10 mm and +/-1 deg and turns on its own axis, and runs about 9 hours on a LiFePO4 24 V 120 Ah (LeadGel 24 V 140 Ah or PureLead 24 V 120 Ah options) battery with 3 h recharge. Safety comes from 2 Sick S300 laser scanners, sensitive edges, 2 e-stops, Sick Flexi safety controller, and the vehicle conforms to ISO 3691-4:2020 for driverless industrial trucks.
特長
- Nominal payload 150 kg
- maximum 180 kg
- Equipment: powered roller deck 855 x 655 mm at 800 mm height
- Size 1,400 x 662 x 850 mm
- 350 kg without batteries
- Drive: double-trike omnidirectional drive (2 x 300 W)
- max speed 1.0 m/s
- slopes up to 3%
- Battery: LiFePO4 24 V 120 Ah (LeadGel 24 V 140 Ah or PureLead 24 V 120 Ah options)
- about 9 h autonomy, 3 h recharge
- Safety: 2 Sick S300 laser scanners, sensitive edges, 2 e-stops, Sick Flexi safety controller
- Natural navigation by laser scanner (odometric closed loop)
- map acquired automatically by the robot
- Positioning accuracy +/-10 mm and +/-1 deg
- turns on its own axis
- Wi-Fi 802.11a/b/g/n (2.4/5 GHz)
- Indoor use +5 to 35 C, 30-80% RH
- IP degree 13 (datasheet)
- Stainless steel (AISI 304) chassis
- complies with Machinery Directive and ISO 3691-4:2020
技術仕様
検証済み| 本体 | |
| 重量 | 350 kg |
|---|---|
| 寸法 | L 1.4 m × W 662 mm × H 850 mm |
| 可搬重量 | 150 kg |
| 移動性能 | |
| 移動方式 | 車輪型 |
| 速度 | 3.6 km/h |
| 使用環境 | Indoor factories and warehouses (+5 to 35 C) |
| 電源 | |
| バッテリー駆動時間 | 540 min |
| センシング・演算 | |
| センサー | Sick laser scanners (navigation and safety), sensitive safety edges |
| 接続性 | Wi-Fi 802.11a/b/g/n (2.4/5 GHz) |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
検証済み| 本体 | |
| 重量 | 350 kg |
|---|---|
| 寸法 | L 1.4 m × W 662 mm × H 850 mm |
| 可搬重量 | 150 kg |
| 移動性能 | |
| 移動方式 | 車輪型 |
| 速度 | 3.6 km/h |
| 使用環境 | Indoor factories and warehouses (+5 to 35 C) |
| 電源 | |
| バッテリー駆動時間 | 540 min |
| センシング・演算 | |
| センサー | Sick laser scanners (navigation and safety), sensitive safety edges |
| 接続性 | Wi-Fi 802.11a/b/g/n (2.4/5 GHz) |
画像
martti
投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the EROLLER 8?
EROLLER 8 is a model in Oppent's EROLLER family of autonomous mobile robots, built in Italy. Its omnidirectional drive lets it line its 800 mm-high roller deck up precisely with conveyors to transfer loads up to 150 kg.\nPer its datasheet it measures 1,400 x 662 x 850 mm, weighs 350 kg without batteries and carries 150…
Who makes the EROLLER 8?
The EROLLER 8 is made by Oppent, a robotics company based in Italy.
How much does the EROLLER 8 cost?
Oppent has not publicly announced pricing for the EROLLER 8. You can enquire through RobotAIGeek for current pricing.
What is the EROLLER 8 used for?
The EROLLER 8 is designed for 構内物流, マテリアルハンドリング, 搬送, and intralogistics. It is used in 倉庫・物流 and 製造 settings.
What is the payload capacity of the EROLLER 8?
The EROLLER 8 has a payload capacity of 150 kg.
How much does the EROLLER 8 weigh?
The EROLLER 8 weighs 350 kg.
How fast is the EROLLER 8?
The EROLLER 8 can move at speeds of up to 3.6 km/h.
What is the battery life of the EROLLER 8?
The EROLLER 8 runs for about 540 minutes on a charge.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- EROLLER 8 vs Magazino SOTO
- EROLLER 8 vs Bosch Rexroth ACTIVE Shuttle
- EROLLER 8 vs Wonik Robotics WR300CV
- EROLLER 8 vs Wonik Robotics WR300CB
- EROLLER 8 vs Wonik Robotics WR300LF
