BESCHREIBUNG
CLINABO ist ein Cleaning-Robots von Nippon Signal. Er ist für Reinigung, Autonomous wet floor scrubbing ausgelegt. Eckdaten: 220 kg, 180 min Laufzeit.
CLINABO is Nippon Signal's autonomous wet floor-cleaning robot, built for tiled and waxed floors in stations, service areas and other public buildings and meant to work alongside cleaning staff to ease labour shortages. Early units learned their routes by being driven round once by hand; the current model generates its routes automatically, cutting setup from about two hours of teaching to about 15 minutes (10 minutes of mapping and 5 of route generation). For safety it carries Nippon Signal's own sensor from its railway platform-door systems, giving 3D obstacle detection, and ultrasonic sensors prevent falls at steps and collisions. It rides over tactile paving and expansion joints, and its dirty-water tank has a fixed lid and an open shape for easy cleaning. It measures 700 mm wide, 994 mm deep and 1,094 mm tall and weighs about 220 kg. One battery gives about 3 hours of continuous running, covering about 4,800 square metres. JR East uses it at Takanawa Gateway station, and NEXCO Central put one to work in the toilets of Shin-Tomei Hamamatsu service area in July 2021.
FUNKTIONEN
- Wet floor scrubbing for tile and waxed floors
- Automatic route generation: about 15 min setup (10 min mapping + 5 min routes) vs about 2 h teaching
- Nippon Signal platform-door safety sensor for 3D obstacle detection
- Ultrasonic sensors for step-drop and collision prevention
- Crosses tactile paving and expansion joints in stations
- 700 x 994 x 1,094 mm
- about 220 kg
- About 3 h per battery, about 4,800 m2 per battery
- Easy-clean dirty-water tank with fixed lid
TECHNISCHE DATEN
Verifiziert| Physisch | |
| Gewicht | 220 kg |
|---|---|
| Abmessungen | L 994 mm × W 700 mm × H 1.09 m |
| Mobilität | |
| Bewegungsart | Radbasiert |
| Einsatzumgebung | Indoor public floors: railway stations, expressway service areas, commercial buildings (tile and waxed floors) |
| Energie | |
| Akkulaufzeit | 180 min |
| Sensorik & Rechenleistung | |
| Sensoren | Nippon Signal 3D safety sensor (platform-door type), ultrasonic sensors, laser sensor |
| Software / KI | Automatic map and route generation |
ROBOTER-FOREN
Foren werden geladen...
TECHNISCHE DATEN
Verifiziert| Physisch | |
| Gewicht | 220 kg |
|---|---|
| Abmessungen | L 994 mm × W 700 mm × H 1.09 m |
| Mobilität | |
| Bewegungsart | Radbasiert |
| Einsatzumgebung | Indoor public floors: railway stations, expressway service areas, commercial buildings (tile and waxed floors) |
| Energie | |
| Akkulaufzeit | 180 min |
| Sensorik & Rechenleistung | |
| Sensoren | Nippon Signal 3D safety sensor (platform-door type), ultrasonic sensors, laser sensor |
| Software / KI | Automatic map and route generation |
Bilder



Bildbeiträge
Videos
ROBOTER-FOREN
Foren werden geladen...
BEWERTUNGEN
HÄUFIG GESTELLTE FRAGEN
What is the CLINABO?
CLINABO is Nippon Signal's autonomous wet floor-cleaning robot, built for tiled and waxed floors in stations, service areas and other public buildings and meant to work alongside cleaning staff to ease labour shortages.
Who makes the CLINABO?
The CLINABO is made by Nippon Signal, a robotics company based in Japan.
How much does the CLINABO cost?
Nippon Signal has not publicly announced pricing for the CLINABO. You can enquire through RobotAIGeek for current pricing.
What is the CLINABO used for?
The CLINABO is designed for reinigung and autonomous wet floor scrubbing. It is used in gewerbe, gebäudemanagement, sonstige, and reinigung & gebäudemanagement settings.
How much does the CLINABO weigh?
The CLINABO weighs 220 kg.
What is the battery life of the CLINABO?
The CLINABO runs for about 180 minutes on a charge.
MIT ÄHNLICHEN ROBOTERN VERGLEICHEN
Sehen Sie, wie sich dieser Roboter gegenüber seinen nächsten Alternativen schlägt
- CLINABO vs Allybot-C2
- CLINABO vs Allybot-C2 Pro
- CLINABO vs Allybot-C3 Mini
- CLINABO vs RAPiiTT
- CLINABO vs RSrobo







