説明
CLINABOはNippon SignalのCleaning-Robotsです。 清掃、Autonomous wet floor scrubbing向けに設計されています。 主な数値:220 kg、稼働時間 180 分。
CLINABO is Nippon Signal's autonomous wet floor-cleaning robot, built for tiled and waxed floors in stations, service areas and other public buildings and meant to work alongside cleaning staff to ease labour shortages. Early units learned their routes by being driven round once by hand; the current model generates its routes automatically, cutting setup from about two hours of teaching to about 15 minutes (10 minutes of mapping and 5 of route generation). For safety it carries Nippon Signal's own sensor from its railway platform-door systems, giving 3D obstacle detection, and ultrasonic sensors prevent falls at steps and collisions. It rides over tactile paving and expansion joints, and its dirty-water tank has a fixed lid and an open shape for easy cleaning. It measures 700 mm wide, 994 mm deep and 1,094 mm tall and weighs about 220 kg. One battery gives about 3 hours of continuous running, covering about 4,800 square metres. JR East uses it at Takanawa Gateway station, and NEXCO Central put one to work in the toilets of Shin-Tomei Hamamatsu service area in July 2021.
特長
- Wet floor scrubbing for tile and waxed floors
- Automatic route generation: about 15 min setup (10 min mapping + 5 min routes) vs about 2 h teaching
- Nippon Signal platform-door safety sensor for 3D obstacle detection
- Ultrasonic sensors for step-drop and collision prevention
- Crosses tactile paving and expansion joints in stations
- 700 x 994 x 1,094 mm
- about 220 kg
- About 3 h per battery, about 4,800 m2 per battery
- Easy-clean dirty-water tank with fixed lid
技術仕様
検証済み| 本体 | |
| 重量 | 220 kg |
|---|---|
| 寸法 | L 994 mm × W 700 mm × H 1.09 m |
| 移動性能 | |
| 移動方式 | 車輪型 |
| 使用環境 | Indoor public floors: railway stations, expressway service areas, commercial buildings (tile and waxed floors) |
| 電源 | |
| バッテリー駆動時間 | 180 min |
| センシング・演算 | |
| センサー | Nippon Signal 3D safety sensor (platform-door type), ultrasonic sensors, laser sensor |
| ソフトウェア / AI | Automatic map and route generation |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
検証済み| 本体 | |
| 重量 | 220 kg |
|---|---|
| 寸法 | L 994 mm × W 700 mm × H 1.09 m |
| 移動性能 | |
| 移動方式 | 車輪型 |
| 使用環境 | Indoor public floors: railway stations, expressway service areas, commercial buildings (tile and waxed floors) |
| 電源 | |
| バッテリー駆動時間 | 180 min |
| センシング・演算 | |
| センサー | Nippon Signal 3D safety sensor (platform-door type), ultrasonic sensors, laser sensor |
| ソフトウェア / AI | Automatic map and route generation |
画像



投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the CLINABO?
CLINABO is Nippon Signal's autonomous wet floor-cleaning robot, built for tiled and waxed floors in stations, service areas and other public buildings and meant to work alongside cleaning staff to ease labour shortages.
Who makes the CLINABO?
The CLINABO is made by Nippon Signal, a robotics company based in Japan.
How much does the CLINABO cost?
Nippon Signal has not publicly announced pricing for the CLINABO. You can enquire through RobotAIGeek for current pricing.
What is the CLINABO used for?
The CLINABO is designed for 清掃 and autonomous wet floor scrubbing. It is used in 商業, 施設, その他, and 清掃・施設管理 settings.
How much does the CLINABO weigh?
The CLINABO weighs 220 kg.
What is the battery life of the CLINABO?
The CLINABO runs for about 180 minutes on a charge.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- CLINABO vs Allybot-C2
- CLINABO vs Allybot-C2 Pro
- CLINABO vs Allybot-C3 Mini
- CLINABO vs RAPiiTT
- CLINABO vs RSrobo







