RobotAIGeek
★尚未評分

ErigoPro

ExosuitSwitzerlandSwitzerland已發布
ErigoPro
比較
來源:
行業:
用途:
價格:
尚未公布
發布年份:
2013

描述

The ErigoPro is Hocoma's robotic tilt table for very early rehabilitation - patients who are still bed-bound or dependent on a wheelchair. It is the only therapy Hocoma offers that combines three things at once: gradual verticalization, robotic leg mobilisation, and intensive sensorimotor stimulation through cyclic loading of the legs. Bringing a patient upright too quickly after a severe injury risks orthostatic collapse; the Erigo raises them in stages while the robotic legs keep stepping, so blood keeps moving and the cardiovascular system is challenged progressively rather than abruptly. What separates the Pro from the Basic model is functional electrical stimulation: on the ErigoPro the FES is fully synchronised with the robotic leg movement and driven from the graphical interface, with stimulation amplitude adjustable per channel, so muscles contract in time with the step rather than independently of it. Hocoma's technical data sheet gives the ErigoPro a verticalization angle adjustable from 0 to 90 degrees, a range of motion of 0 to 45 degrees that can be set symmetrically or asymmetrically, and hip extension/flexion from -10 to +10 degrees. It adapts continuously to leg lengths of 69 to 104 cm and the bed height adjusts from 56 to 84 cm for transfers. Maximum patient weight is 135 kg. The device itself measures 227 x 86 x 242 cm and weighs about 300 kg, needs a 400 x 240 x 245 cm footprint, and runs on 220-240 V or 110-120 V at 50-60 Hz. Hocoma's stated outcome is that immobile patients can build lower-limb muscle strength and reach greater functional independence in activities of daily living sooner than they otherwise would. A flexible patient harness, several leg-cuff sizes and footplates adjustable for plantar and dorsal flexion and for pronation and supination cover the range of body sizes and positions. Hocoma sells the Erigo in two configurations. The ErigoBasic provides the verticalization, the robotic leg stepping and the cyclic loading; the ErigoPro adds the synchronised functional electrical stimulation described above. They share the same chassis and the technical data above, and Hocoma's current catalogue lists only the Pro.

功能特色

  • Robotic tilt table for early rehabilitation of bed-bound patients
  • Combines gradual verticalization, leg mobilisation and cyclic sensorimotor stimulation
  • FES fully synchronised with the robotic leg movement (Pro only)
  • FES amplitude adjustable per channel from the graphical interface
  • Verticalization angle adjustable 0-90 degrees
  • Range of motion 0-45 degrees, symmetric or asymmetric
  • Hip extension/flexion -10 to +10 degrees
  • Adapts to leg lengths of 69-104 cm
  • Bed height adjusts 56-84 cm for patient transfer
  • Maximum patient weight 135 kg
  • Device 227 x 86 x 242 cm, approx. 300 kg
  • Footplates adjustable for plantar/dorsal flexion and pronation/supination
  • 220-240 V or 110-120 V, 50-60 Hz

技術規格

已驗證
物理參數
重量Approx. 300 kg
外形尺寸L 2.27 m × W 860 mm × H 2.42 m
移動能力
移動類型文具
操作能力低
作業環境Intensive care and early-rehabilitation wards; 10-35 C.
電源與續航
續航時間6 hours
感知與計算
軟體 / AIGraphical user interface with synchronised FES control
來源:製造商官網來源:第三方暫無來源來源狀態基於該機器人已登記的資料來源。

常見問題

What is the ErigoPro?

The ErigoPro is Hocoma's robotic tilt table for very early rehabilitation - patients who are still bed-bound or dependent on a wheelchair.

Who makes the ErigoPro?

The ErigoPro is made by Hocoma, a robotics company based in Switzerland.

How much does the ErigoPro cost?

Hocoma has not publicly announced pricing for the ErigoPro. You can enquire through RobotAIGeek for current pricing.

What is the ErigoPro used for?

The ErigoPro is designed for 復健. It is used in 醫療保健 settings.

How much does the ErigoPro weigh?

The ErigoPro weighs 300 kg.

What is the battery life of the ErigoPro?

The ErigoPro runs for 6 hours on a charge.

When was the ErigoPro released?

The ErigoPro was released in 2013.

與同類機器人對比

看看這款機器人與最接近的同類產品相比表現如何

ErigoPro 的替代選擇 →

訂閱獲取最新機器人資訊?