설명
VertiDrive M4은(는) BlastOne의 Cleaning-Robots입니다. 청소, Surface preparation: abrasive blasting, UHP waterjetting and washing of steel 용도로 설계되었습니다.
The VertiDrive M4 is a remote-controlled magnetic crawler for closed ultra-high-pressure waterjet blasting: a shrouded blast head 400 mm wide strips thick coatings from steel tank walls and ship hulls while the VertiDrive vacuum system recovers the waste water and dries the surface at once to prevent flash rust, so there is no dust and the work area stays clean for other trades. It covers up to 45 m2 per hour - about five times faster than manual work - on horizontal and vertical surfaces, disassembles to pass through a 24-inch manhole, comes in electric, pneumatic and ATEX Zone II versions, and converts into the open-blasting M3 with a conversion kit.
주요 기능
- Up to 45 m2 (485 ft2) per hour
- 400 mm cleaning width
- Closed UHP waterjet blasting with vacuum recovery (no dust, no flash rust)
- About 5x faster than manual work
- Permanent magnets: horizontal and vertical steel surfaces
- Disassembles in minutes
- fits through a 24-inch manhole
- Electric, pneumatic and ATEX Zone II versions
- Converts to VertiDrive M3 with conversion kit
- Wireless remote control
기술 사양
| 이동성 | |
| 이동 방식 | 바퀴형 |
|---|---|
| 작동 환경 | Ship hulls, storage tanks and large steel structures; outdoor sites |
| 센싱 & 컴퓨팅 | |
| 연결성 | Wireless remote control |
로봇 포럼
포럼 불러오는 중...
기술 사양
| 이동성 | |
| 이동 방식 | 바퀴형 |
|---|---|
| 작동 환경 | Ship hulls, storage tanks and large steel structures; outdoor sites |
| 센싱 & 컴퓨팅 | |
| 연결성 | Wireless remote control |
이미지
martti
이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the VertiDrive M4?
The VertiDrive M4 is a remote-controlled magnetic crawler for closed ultra-high-pressure waterjet blasting: a shrouded blast head 400 mm wide strips thick coatings from steel tank walls and ship hulls while the VertiDrive vacuum system recovers the waste water and dries the surface at once to prevent flash rust, so the…
Who makes the VertiDrive M4?
The VertiDrive M4 is made by BlastOne, a robotics company based in Netherlands.
How much does the VertiDrive M4 cost?
BlastOne has not publicly announced pricing for the VertiDrive M4. You can enquire through RobotAIGeek for current pricing.
What is the VertiDrive M4 used for?
The VertiDrive M4 is designed for 청소 and surface preparation: abrasive blasting, uhp waterjetting and washing of steel. It is used in 에너지, 건설, and 제조 settings.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- VertiDrive M4 vs Tank Cleaning Robot
- VertiDrive M4 vs VertiDrive M3
- VertiDrive M4 vs VertiDrive M7
- VertiDrive M4 vs VertiDrive V400
- VertiDrive M4 vs VertiDrive V700
