★아직 평가 없음

THOUZER STANDARD

Collaborative-RobotJapanJapan출시됨
THOUZER STANDARD
비교

설명

THOUZER STANDARD은(는) Doog의 Collaborative-Robot입니다. 사내 물류, 자재 취급, 운반 용도로 설계되었습니다. 주요 수치: 가반 하중 120 kg.

THOUZER STANDARD is a collaborative robotic cart from Doog for carrying and towing loads in workplaces that were never designed for automation. The STANDARD is the mid-size model of the THOUZER series. It measures 600 x 950 mm with a 600 x 750 mm platform at 455 mm height, carries up to 120 kg on the platform, tows up to 300 kg and reaches up to 7.5 km/h in Follow-Me mode, with a range of up to 20 km per charge without towing. It offers three navigation modes that can be switched as the job changes: Follow-Me, which uses wide-angle LiDAR tracking to follow a person, forklift, truck or other target at the press of one button with no tag, map or setup; Memory Trace, which replays a route after an operator walks it once, using frame map matching instead of global SLAM mapping; and Line Trace, which follows low-cost floor tape with barcode markers for destinations and instructions. It runs indoors and outdoors on uneven floors, asphalt, gravel, brick and wet or oily floors, handles a 6-degree slope and a 3 cm step, and works day and night and in light rain. LiDAR obstacle detection, an emergency stop and a safety bumper are standard; it is CE marked, built to ISO 3691-4 and made in Japan. It ships as BASIC (Follow-Me and Memory Trace, ready out of the box) or E-SERIES (advanced Memory Trace, Line Trace, peripheral I/O and system integration), with a paid upgrade between them.

주요 기능

  • Platform payload up to 120 kg
  • Towing up to 300 kg
  • Up to 7.5 km/h in Follow-Me
  • 3.6 km/h in Memory/Line Trace
  • Range up to 20 km per charge (no towing)
  • Robot 600 x 950 mm
  • platform 600 x 750 mm at 455 mm height
  • Follow-Me: LiDAR target following, one button, no tag or map
  • Memory Trace: walk a route once, robot replays it
  • Line Trace with floor tape and barcode markers (E-SERIES)
  • Carries and tows at the same time
  • Indoor and outdoor: asphalt, gravel, brick, wet or oily floors
  • 6-degree slope, 3 cm step, day and night, light rain
  • LiDAR obstacle detection, emergency stop, safety bumper
  • CE marked, built to ISO 3691-4, made in Japan
  • BASIC or E-SERIES configuration
  • accessories for platforms, towing, batteries, safety and interfaces

기술 사양

검증됨
물리 사양
크기L 950 mm × W 600 mm
가반하중120 kg
이동성
이동 방식바퀴형
속도7.49 km/h
작동 환경Factories, warehouses, construction sites, retail and outdoor inter-building routes, on uneven, wet or sloped ground
센싱 & 컴퓨팅
센서LiDAR (Follow-Me tracking, obstacle detection, Memory Trace), Safety bumper, Emergency stop, Optional Line Trace sensor
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the THOUZER STANDARD?

THOUZER STANDARD is a collaborative robotic cart from Doog for carrying and towing loads in workplaces that were never designed for automation. The STANDARD is the mid-size model of the THOUZER series.

Who makes the THOUZER STANDARD?

The THOUZER STANDARD is made by Doog, a robotics company based in Japan.

How much does the THOUZER STANDARD cost?

Doog has not publicly announced pricing for the THOUZER STANDARD. You can enquire through RobotAIGeek for current pricing.

What is the THOUZER STANDARD used for?

The THOUZER STANDARD is designed for 사내 물류, 자재 취급, and 운반. It is used in 건설, 창고·물류, 제조, and 리테일 settings.

What is the payload capacity of the THOUZER STANDARD?

The THOUZER STANDARD has a payload capacity of 120 kg.

How fast is the THOUZER STANDARD?

The THOUZER STANDARD can move at speeds of up to 7.49 km/h.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

THOUZER STANDARD 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?