★아직 평가 없음

SO-101

Educational-RobotsFranceFrance출시됨
SO-101
비교
출처:
가격:
미공개
출시:
2025

설명

SO-101은(는) The Robot Studio의 Educational-Robots입니다. 매니퓰레이션, 연구, 원격 용도로 설계되었습니다. 주요 수치: 6 자유도, 2025년 출시.

The SO-101 is an open-source, 3D-printable robot arm designed by The Robot Studio in collaboration with Hugging Face, and the next-generation version of the earlier SO-100 arm. It is built to work with Hugging Face's open-source LeRobot library, which records demonstrations, trains AI policies and runs them on the arm, and the classic setup is a pair: a follower arm with a gripper that does the work and a leader arm with a handle and trigger that a person moves to teleoperate it. Each arm uses six Feetech STS3215 serial-bus servos connected to a motor control board and a host computer over USB-C. The follower uses 7.4 V servos with 1/345 gearing, with a 12 V, 30 kg.cm version as an option for more strength, while the leader mixes three gear ratios. Compared with the SO-100 it has improved wiring, is easier to assemble because no gears have to be removed, and uses updated motors in the leader arm. Parts are printed in PLA+ on common desktop FDM printers, and the repository adds optional designs such as wrist and overhead camera mounts, a raised leader base and compliant grippers. The Robot Studio publishes the files, assembly guide links and a bill of materials under the Apache-2.0 licence: about USD 122 of parts for one follower arm and USD 230 for a leader-and-follower pair, excluding the printed parts. It does not sell the arm itself; builders print the parts, or buy kits and assembled arms from third-party vendors listed in the repository, including Seeed Studio, WowRobo, RobotEd, Robonine, PartaBot and ForgeMotion Labs.

주요 기능

  • Open-source, 3D-printable 6-servo robot arm (Apache-2.0)
  • Designed by The Robot Studio with Hugging Face
  • successor to the SO-100
  • Leader-follower teleoperation pair: follower with gripper, leader with handle and trigger
  • Works with the open-source LeRobot library for recording, training and inference
  • Six Feetech STS3215 serial-bus servos per arm
  • optional 12 V 30 kg.cm servos for the follower
  • Motor control board, USB-C connection to a host computer
  • Improved wiring and easier assembly than SO-100 (no gear removal)
  • Printable on common FDM printers in PLA+ (Ender and Prusa/Bambu bed files)
  • Parts cost about USD 122 per follower arm, USD 230 per leader-follower pair (BOM, printed parts extra)
  • Optional wrist and overhead camera mounts, raised leader base, compliant grippers
  • Kits and assembled arms sold by third-party vendors, not by The Robot Studio

기술 사양

물리 사양
소재3D-printed PLA+ parts, Feetech STS3215 servos
이동성
이동 방식고정형
자유도6
작동 환경Desks, labs and classrooms
센싱 & 컴퓨팅
연결성USB-C to a host computer via a serial-bus servo control board
소프트웨어 / AIHugging Face LeRobot (open source)
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the SO-101?

The SO-101 is an open-source, 3D-printable robot arm designed by The Robot Studio in collaboration with Hugging Face, and the next-generation version of the earlier SO-100 arm.

Who makes the SO-101?

The SO-101 is made by The Robot Studio, a robotics company based in France.

How much does the SO-101 cost?

The Robot Studio has not publicly announced pricing for the SO-101. You can enquire through RobotAIGeek for current pricing.

What is the SO-101 used for?

The SO-101 is designed for 매니퓰레이션, 연구, 원격, and 교육. It is used in 연구 and 교육 settings.

How many degrees of freedom does the SO-101 have?

The SO-101 has 6 degrees of freedom.

When was the SO-101 released?

The SO-101 was released in 2025.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

SO-101 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?