説明
SO-101はThe Robot StudioのEducational-Robotsです。 マニピュレーション、研究、リモート向けに設計されています。 主な数値:6 自由度、2025年発売。
The SO-101 is an open-source, 3D-printable robot arm designed by The Robot Studio in collaboration with Hugging Face, and the next-generation version of the earlier SO-100 arm. It is built to work with Hugging Face's open-source LeRobot library, which records demonstrations, trains AI policies and runs them on the arm, and the classic setup is a pair: a follower arm with a gripper that does the work and a leader arm with a handle and trigger that a person moves to teleoperate it. Each arm uses six Feetech STS3215 serial-bus servos connected to a motor control board and a host computer over USB-C. The follower uses 7.4 V servos with 1/345 gearing, with a 12 V, 30 kg.cm version as an option for more strength, while the leader mixes three gear ratios. Compared with the SO-100 it has improved wiring, is easier to assemble because no gears have to be removed, and uses updated motors in the leader arm. Parts are printed in PLA+ on common desktop FDM printers, and the repository adds optional designs such as wrist and overhead camera mounts, a raised leader base and compliant grippers. The Robot Studio publishes the files, assembly guide links and a bill of materials under the Apache-2.0 licence: about USD 122 of parts for one follower arm and USD 230 for a leader-and-follower pair, excluding the printed parts. It does not sell the arm itself; builders print the parts, or buy kits and assembled arms from third-party vendors listed in the repository, including Seeed Studio, WowRobo, RobotEd, Robonine, PartaBot and ForgeMotion Labs.
特長
- Open-source, 3D-printable 6-servo robot arm (Apache-2.0)
- Designed by The Robot Studio with Hugging Face
- successor to the SO-100
- Leader-follower teleoperation pair: follower with gripper, leader with handle and trigger
- Works with the open-source LeRobot library for recording, training and inference
- Six Feetech STS3215 serial-bus servos per arm
- optional 12 V 30 kg.cm servos for the follower
- Motor control board, USB-C connection to a host computer
- Improved wiring and easier assembly than SO-100 (no gear removal)
- Printable on common FDM printers in PLA+ (Ender and Prusa/Bambu bed files)
- Parts cost about USD 122 per follower arm, USD 230 per leader-follower pair (BOM, printed parts extra)
- Optional wrist and overhead camera mounts, raised leader base, compliant grippers
- Kits and assembled arms sold by third-party vendors, not by The Robot Studio
技術仕様
| 本体 | |
| 材質 | 3D-printed PLA+ parts, Feetech STS3215 servos |
|---|---|
| 移動性能 | |
| 移動方式 | 固定型 |
| 自由度 | 6 |
| 使用環境 | Desks, labs and classrooms |
| センシング・演算 | |
| 接続性 | USB-C to a host computer via a serial-bus servo control board |
| ソフトウェア / AI | Hugging Face LeRobot (open source) |
ロボットフォーラム
フォーラムを読み込み中...
技術仕様
| 本体 | |
| 材質 | 3D-printed PLA+ parts, Feetech STS3215 servos |
|---|---|
| 移動性能 | |
| 移動方式 | 固定型 |
| 自由度 | 6 |
| 使用環境 | Desks, labs and classrooms |
| センシング・演算 | |
| 接続性 | USB-C to a host computer via a serial-bus servo control board |
| ソフトウェア / AI | Hugging Face LeRobot (open source) |
画像



投稿画像
動画
ロボットフォーラム
フォーラムを読み込み中...
評価
よくある質問
What is the SO-101?
The SO-101 is an open-source, 3D-printable robot arm designed by The Robot Studio in collaboration with Hugging Face, and the next-generation version of the earlier SO-100 arm.
Who makes the SO-101?
The SO-101 is made by The Robot Studio, a robotics company based in France.
How much does the SO-101 cost?
The Robot Studio has not publicly announced pricing for the SO-101. You can enquire through RobotAIGeek for current pricing.
What is the SO-101 used for?
The SO-101 is designed for マニピュレーション, 研究, リモート, and 教育. It is used in 研究 and 教育 settings.
How many degrees of freedom does the SO-101 have?
The SO-101 has 6 degrees of freedom.
When was the SO-101 released?
The SO-101 was released in 2025.
類似ロボットと比較
このロボットが最も近い代替候補とどう比べられるかをご覧ください
- SO-101 vs Galaxea A1 X
- SO-101 vs onero Robotic Arm A1
- SO-101 vs Pickerbot Mini
- SO-101 vs Pickerbot Pro
- SO-101 vs ASYSTR 3C







