★아직 평가 없음

Shihe HighMate B10

Cleaning-RobotsChinaChina출시됨
Shihe HighMate B10
비교
가격:
미공개

설명

Shihe HighMate B10은(는) Shihe Technology의 Cleaning-Robots입니다. 청소, 코팅 용도로 설계되었습니다. 주요 수치: 72 kg.

B10 is Shihe's closing-seam shot-blasting robot, built for one job in shipbuilding: treating the steel either side of the weld after large hull sections are joined. That seam is the last surface to be prepared and the hardest to reach, high on a hull with no scaffold. The robot is a magnetic chassis carrying a shot-blasting head, a remote, a vacuum cleaner and recovery hosing. Abrasive is thrown at the plate to strip paint and rust, then circulated back inside the head for reuse, while the vacuum recovers dust into a waste bin - the point being both cost and the operator's lungs. It reaches Sa2.5 surface quality and up to Sa3, with a 50-90 micron roughness profile for paint adhesion, and Shihe puts it at more than five times the throughput of manual grinding. The machine is 905 x 500 x 500 mm and 72 kg, works a 180 mm width at 10 m/min, uses 1.0 mm steel grit, and is rated IP65. The operator stands on the ground with a remote, which removes the fall risk entirely.

주요 기능

  • Shot blasting either side of closing-seam welds after hull sections are joined
  • Abrasive recirculated inside the blasting head for reuse
  • External vacuum system recovers dust to a waste bin
  • Surface quality Sa2.5, up to Sa3
  • roughness 50-90 microns
  • More than five times the throughput of manual grinding
  • Dimensions 905 x 500 x 500 mm
  • weight 72 kg
  • Working width 180 mm
  • travel speed 10 m/min
  • Abrasive 1.0 mm steel grit
  • Protection rating IP65
  • Ground-level remote operation - no scaffolding, cradle or aerial platform

기술 사양

검증됨
물리 사양
무게72 kg
크기L 905 mm × W 500 mm × H 500 mm
이동성
이동 방식바퀴형
속도0.6 km/h
조작 능력낮음
작동 환경Hull exteriors at closing seams after large-section joining, in shipyards, IP65
액추에이터Magnetic-adhesion chassis carrying a recirculating shot-blasting head over a 180 mm swath at 10 m/min
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the Shihe HighMate B10?

B10 is Shihe's closing-seam shot-blasting robot, built for one job in shipbuilding: treating the steel either side of the weld after large hull sections are joined. That seam is the last surface to be prepared and the hardest to reach, high on a hull with no scaffold.

Who makes the Shihe HighMate B10?

The Shihe HighMate B10 is made by Shihe Technology, a robotics company based in China.

How much does the Shihe HighMate B10 cost?

Shihe Technology has not publicly announced pricing for the Shihe HighMate B10. You can enquire through RobotAIGeek for current pricing.

What is the Shihe HighMate B10 used for?

The Shihe HighMate B10 is designed for 청소 and 코팅. It is used in 인양·구난 and 제조 settings.

How much does the Shihe HighMate B10 weigh?

The Shihe HighMate B10 weighs 72 kg.

How fast is the Shihe HighMate B10?

The Shihe HighMate B10 can move at speeds of up to 0.6 km/h.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

Shihe HighMate B10 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?