★아직 평가 없음

RoboTome RTM 30

Industrial-RobotUnited StatesUnited States출시됨
RoboTome RTM 30
비교

설명

RoboTome RTM 30은(는) Morphle Labs의 Industrial-Robot입니다. 분석, 범용 자동화, 점검 용도로 설계되었습니다. 주요 수치: 600 kg.

RoboTome RTM 30 is a robotic microtome from Morphle Labs that automates the cutting of thin tissue sections from paraffin-embedded biopsy blocks and places them on glass slides, a step in histopathology that is normally done by hand by histotechnologists. Up to 30 blocks are loaded per batch. An operator first sets the facing depth for each block, cycling digitally through blocks on several machines; the robot then takes over and sections autonomously, using protocol data linked to each block's barcode. Sections are cut at a consistent 4 um, carried in a water-based transport and picked up onto slides, then scanned at high resolution so artefacts are caught before the block is changed. The blade is chilled continuously and robotically shifted or switched when the system detects wear, and the block surface is cooled under time and temperature control so it does not chip. Each unit produces about 100 slides per hour with a 30-45 minute cycle, and one operator can run five units digitally. The machine stands 5.5 ft (about 1.68 m) tall on a 4.8 x 2.5 ft base and weighs 600 kg. Block-to-slide barcode matching, bi-directional LIMS integration and a remote mode, in which a distant histotechnologist faces and sections blocks over the network with live cameras, are included.

주요 기능

  • Robotic microtome for histopathology
  • About 100 slides per hour per unit
  • One operator can digitally control 5 units (about 500 slides per hour)
  • Consistent sectioning at 4 um
  • Works with soft (e.g. GI) to hard (e.g. uterine) blocks
  • 30 blocks per batch
  • 30-45 minute cycle time
  • Operator sets facing depth
  • sectioning is then autonomous
  • Sectioning protocol derived from block barcodes
  • Slide cartridges of 15 slides that can be unloaded individually
  • Patent-pending time and temperature controlled block surface chilling
  • Continuous blade chilling
  • Adaptive blade switching: sections scanned for blade defects
  • blade shifted or switched robotically
  • Real-time QC: sections on slides scanned at high resolution before the block is switched
  • Slide-to-block barcode traceability
  • Patent-pending water-based section cutting, transport and pickup with flow-based cleaning to avoid floaters
  • Up to 3 sections per slide at a repeatable offset
  • Compliant blocks 15 x 15 mm to 24 x 37 mm
  • Compliant slides 25 x 75 mm (45-degree cut corners preferred)
  • Standard high-profile microtome blades (80 x 14 x 0.32 mm)
  • Barcodes: linear (CODE 39, CODE 128) and matrix (QR, PDF417)
  • Custom bi-directional LIMS integration
  • LIS integration for grossing notes
  • Remote mode: network control with real-time cameras for a remote histotechnologist
  • No new consumables required
  • Base 4.8 x 2.5 ft, height 5.5 ft
  • Weight 600 kg (1,320 lb)

기술 사양

검증됨
물리 사양
무게600 kg
크기L 1.46 m × W 762 mm × H 1.68 m
이동성
이동 방식고정형
작동 환경Indoor histopathology laboratory
센싱 & 컴퓨팅
센서High-resolution section/slide imaging cameras, Barcode readers (linear and matrix), Real-time cameras for remote operation
연결성Network control for remote operation; LIMS/LIS integration
소프트웨어 / AICluster control software for facing and sectioning across multiple units; AI-based section QC
제조사 출처서드파티 출처출처 없음출처 상태는 이 로봇에 등록된 출처를 기준으로 합니다.

로봇 포럼

포럼 불러오는 중...

자주 묻는 질문

What is the RoboTome RTM 30?

RoboTome RTM 30 is a robotic microtome from Morphle Labs that automates the cutting of thin tissue sections from paraffin-embedded biopsy blocks and places them on glass slides, a step in histopathology that is normally done by hand by histotechnologists. Up to 30 blocks are loaded per batch.

Who makes the RoboTome RTM 30?

The RoboTome RTM 30 is made by Morphle Labs, a robotics company based in United States.

How much does the RoboTome RTM 30 cost?

Morphle Labs has not publicly announced pricing for the RoboTome RTM 30. You can enquire through RobotAIGeek for current pricing.

What is the RoboTome RTM 30 used for?

The RoboTome RTM 30 is designed for 분석, 범용 자동화, 점검, and 원격. It is used in 연구 and 헬스케어 settings.

How much does the RoboTome RTM 30 weigh?

The RoboTome RTM 30 weighs 600 kg.

유사 로봇과 비교

이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요

RoboTome RTM 30 대체 로봇 →

관련 로봇

더 보기 >

최신 로봇 소식을 매주 받아보시겠어요?