설명
The EXO S Pro is NAVEE's first exoskeleton and, so far, its only one — a hip-worn assist device from a company otherwise known for electric scooters. It launched on 1 July 2026 at EUR 1,099. It is built around a 960 W peak output that NAVEE says cuts physical exertion by up to 35%, in a frame weighing 1.8 kg without battery and straps. Carbon fibre and an ergonomic structure keep the weight down, and the wearer is strapped in with what NAVEE calls an AirWrap SoftSuit — a skin-friendly multi-layer harness with adjustable fit straps that folds to 460 x 290 x 140 mm. The assistance is chosen by the device rather than the wearer. Ten action-recognition modes — up stairs, down stairs, uphill, downhill, trail, cycling, running, gravel, race walking and jogging — are detected with what NAVEE describes as millisecond-level response, so the machine adapts as the terrain changes. A 5,000 mAh quick-swap battery is rated for 40,000 assisted steps, about 25 km, and doubles as a 20 W power bank for other devices. The unit is rated IP54 and works from -10 to 45 C, and NAVEE sells it with a two-year warranty.
주요 기능
- 960 W peak power output
- Reduces physical exertion by up to 35%
- Net weight 1.8 kg (excluding battery and straps)
- 10 AI action-recognition assist modes: up stairs, down stairs, uphill, downhill, trail, cycling, running, gravel, race walking, jogging
- Millisecond-level response to detected movement
- 5,000 mAh quick-swap battery
- 40,000 assisted steps (about 25 km) per charge
- 20 W reverse charging — the battery powers other devices
- Carbon fibre structure with ergonomic design
- AirWrap SoftSuit harness with adjustable fit straps
- Folded dimensions 460 x 290 x 140 mm
- IP54 dust and water resistance
- Operating temperature -10 to 45 C
- Two-year warranty
기술 사양
검증됨| 물리 사양 | |
| 무게 | 1.8 kg |
|---|---|
| 크기 | L 460 mm × W 290 mm × H 140 mm |
| 이동성 | |
| 이동 방식 | 기타 |
| 작동 환경 | Outdoor and urban use — hiking trails, gravel, stairs, slopes and commuting; -10 to 45 C, IP54 |
| 전원 | |
| 배터리 지속 시간 | 5,000 mAh |
| 센싱 & 컴퓨팅 | |
| 센서 | motion sensors (10-action recognition) |
| 연결성 | Companion app for iOS and Android |
기술 사양
검증됨| 물리 사양 | |
| 무게 | 1.8 kg |
|---|---|
| 크기 | L 460 mm × W 290 mm × H 140 mm |
| 이동성 | |
| 이동 방식 | 기타 |
| 작동 환경 | Outdoor and urban use — hiking trails, gravel, stairs, slopes and commuting; -10 to 45 C, IP54 |
| 전원 | |
| 배터리 지속 시간 | 5,000 mAh |
| 센싱 & 컴퓨팅 | |
| 센서 | motion sensors (10-action recognition) |
| 연결성 | Companion app for iOS and Android |
이미지




이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the NAVEE EXO S Pro?
The EXO S Pro is NAVEE's first exoskeleton and, so far, its only one — a hip-worn assist device from a company otherwise known for electric scooters. It launched on 1 July 2026 at EUR 1,099.
Who makes the NAVEE EXO S Pro?
The NAVEE EXO S Pro is made by NAVEE, a robotics company based in China.
How much does the NAVEE EXO S Pro cost?
The NAVEE EXO S Pro is priced at around €1,099.
What is the NAVEE EXO S Pro used for?
The NAVEE EXO S Pro is designed for 도우미. It is used in 소비자, 레저·관광, and 헬스케어 settings.
How much does the NAVEE EXO S Pro weigh?
The NAVEE EXO S Pro weighs 1.8 kg.
When was the NAVEE EXO S Pro released?
The NAVEE EXO S Pro was released in 2026.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- NAVEE EXO S Pro vs Hypershell X Go
- NAVEE EXO S Pro vs Hypershell X Pro
- NAVEE EXO S Pro vs Hypershell X Carbon
- NAVEE EXO S Pro vs Hypershell X Ultra
- NAVEE EXO S Pro vs Hypershell X Pro S




