설명
MOVENEW P1은(는) MICBOT의 Industrial-Robot입니다. 점검, 순찰, Petrochemical plant inspection 용도로 설계되었습니다. 주요 수치: 77 kg, 가동 시간 480분, 가반 하중 200 kg.
The MOVENEW P1 is Micbot's industrial special-purpose wheeled quadruped, and its headline is payload: 400 kg standing and 200 kg walking on a 77 kg body, which comes from a deliberately wide-body, short-leg architecture and sixteen joint modules peaking at 450 N·m. Wheels on articulated legs let it roll at 3 m/s where the ground allows and walk where it does not, clearing 25 cm steps, 800 mm obstacles and slopes beyond 45 degrees. Protection is the other half of the pitch — IP67 body with IP68 wheels, built for petrochemical plants, mines and aluminium facilities. A hot-swappable 3.2 kWh nickel-cobalt-manganese pack on 72 V runs 12 hours unloaded or 8 under full load and recharges in 90 minutes, so a swap keeps it working around the clock. Perception centres on an automotive-grade 96-line LiDAR, expandable to three units, with optional depth cameras and ultrasonic radar and an onboard IMU, and the compute platform supports up to 2,000 TOPS. An expansion rail, three USB and an RS485 radar port, plus HDMI for camera and audio-vision, leave room for mission payloads on top.
주요 기능
- 400 kg maximum standing payload and 200 kg walking payload on a 77 kg body
- 16 high-performance joint modules at up to 450 N·m
- 3 m/s platform speed with 25 cm stair climbing, 800 mm maximum climbing height and slopes beyond 45 degrees
- hot-swappable 3.2 kWh NMC battery at 72 V, 12 hours no-load and 8 hours full-load endurance, 1.5-hour charge
- folds from 900 x 600 x 650 mm standing to 1150 x 800 x 200 mm with a 595 x 419 x 129 mm load area
- IP67 body with IP68 wheel protection
- compute platform supporting up to 2,000 TOPS
- automotive-grade 96-line LiDAR expandable to three units, with optional HD depth camera and ultrasonic radar plus IMU
- Bluetooth 5.4, Wi-Fi, OTA update, app support and handheld remote control
- expansion rail and secondary development
- RS485 and triple USB radar port, HDMI camera port, HDMI and USB audio-vision port
- one-year warranty with fast charger.
기술 사양
검증됨| 물리 사양 | |
| 무게 | 77 kg |
|---|---|
| 크기 | L 900 mm × W 600 mm × H 650 mm |
| 가반하중 | 200 kg |
| 이동성 | |
| 이동 방식 | 사족보행, 바퀴형 |
| 속도 | 10.8 km/h |
| 조작 능력 | 낮음 |
| 작동 환경 | Hazardous industrial sites; IP67 body and IP68 wheels; 25 cm stair height, 800 mm maximum climbing height, slope beyond 45°, IP67 body, IP68 wheels, -40°C to 55°C |
| 액추에이터 | 16 high-performance joint modules, maximum module torque 450 N·m; wheel-legged quadruped on 210 mm wheels; wide-body short-leg architecture |
| 전원 | |
| 배터리 지속 시간 | <=12 h no-load, <=8 h full-load |
| 충전 방식 | Fast charger; hot-swappable battery |
| 충전 시간 | 1.5 h |
| 센싱 & 컴퓨팅 | |
| 센서 | automotive-grade 96-line LiDAR x1, expandable to 3, optional HD depth camera, optional ultrasonic radar, IMU |
| 연결성 | Bluetooth 5.4 and Wi-Fi; RS485 x1 and USB x3 radar port; HDMI x1 camera port; HDMI x1 and USB x1 audio-vision port |
| 소프트웨어 / AI | Integrated sensing, planning, control and drive platform; OTA update; app support; secondary development |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 77 kg |
|---|---|
| 크기 | L 900 mm × W 600 mm × H 650 mm |
| 가반하중 | 200 kg |
| 이동성 | |
| 이동 방식 | 사족보행, 바퀴형 |
| 속도 | 10.8 km/h |
| 조작 능력 | 낮음 |
| 작동 환경 | Hazardous industrial sites; IP67 body and IP68 wheels; 25 cm stair height, 800 mm maximum climbing height, slope beyond 45°, IP67 body, IP68 wheels, -40°C to 55°C |
| 액추에이터 | 16 high-performance joint modules, maximum module torque 450 N·m; wheel-legged quadruped on 210 mm wheels; wide-body short-leg architecture |
| 전원 | |
| 배터리 지속 시간 | <=12 h no-load, <=8 h full-load |
| 충전 방식 | Fast charger; hot-swappable battery |
| 충전 시간 | 1.5 h |
| 센싱 & 컴퓨팅 | |
| 센서 | automotive-grade 96-line LiDAR x1, expandable to 3, optional HD depth camera, optional ultrasonic radar, IMU |
| 연결성 | Bluetooth 5.4 and Wi-Fi; RS485 x1 and USB x3 radar port; HDMI x1 camera port; HDMI x1 and USB x1 audio-vision port |
| 소프트웨어 / AI | Integrated sensing, planning, control and drive platform; OTA update; app support; secondary development |
이미지


이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the MOVENEW P1?
The MOVENEW P1 is Micbot's industrial special-purpose wheeled quadruped, and its headline is payload: 400 kg standing and 200 kg walking on a 77 kg body, which comes from a deliberately wide-body, short-leg architecture and sixteen joint modules peaking at 450 N·m.
Who makes the MOVENEW P1?
The MOVENEW P1 is made by MICBOT, a robotics company based in China.
How much does the MOVENEW P1 cost?
MICBOT has not publicly announced pricing for the MOVENEW P1. You can enquire through RobotAIGeek for current pricing.
What is the MOVENEW P1 used for?
The MOVENEW P1 is designed for 점검, 순찰, petrochemical plant inspection, and mining operations. It is used in 에너지, 광업, 제조, and 보안·순찰 settings.
What is the payload capacity of the MOVENEW P1?
The MOVENEW P1 has a payload capacity of 200 kg.
How much does the MOVENEW P1 weigh?
The MOVENEW P1 weighs 77 kg.
How fast is the MOVENEW P1?
The MOVENEW P1 can move at speeds of up to 10.8 km/h.
What is the battery life of the MOVENEW P1?
The MOVENEW P1 runs for <=12 h no-load, <=8 h full-load on a charge. It takes 1.5 h to charge.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- MOVENEW P1 vs MOVENEW P1 ExR
- MOVENEW P1 vs MOVENEW P2
- MOVENEW P1 vs MagicDog Y1
- MOVENEW P1 vs Galileo S1
- MOVENEW P1 vs Galileo S1-W






