설명
GAROO은(는) Doog의 Medical-Robots입니다. 의료 보조, 도우미, 운반 용도로 설계되었습니다. 주요 수치: 52 kg, 가반 하중 100 kg.
GAROO is Doog's robotic wheelchair for airports, hospitals and other large facilities that move passengers or patients every day. It uses the same navigation technology as the THOUZER robotic cart in wheelchair form and works in Follow-Me mode: a LiDAR sensor tracks the target ahead within a 10 m radius, so GAROO follows a staff member with no map, floor markers or fixed route, and a person stays in charge of every journey. GAROO was developed together with an airport operator, where it is used for passenger mobility services, and is built for organisations rather than personal use. Several GAROOs can be lined up so that the first follows the staff member and each one behind follows the one ahead, letting one staff member lead up to three passengers per trip. It travels at up to 5 km/h, works in all wheelchair-accessible areas up to a 6-degree gradient and covers 10 to 15 km per charge. Safety features include a seat belt that must be fastened before it moves, passenger exit detection by LiDAR that stops it and sounds an alarm, a STOP button for the passenger, and a joystick at the back for staff to take direct control.
주요 기능
- Follow-Me: follows a staff member with LiDAR, 10 m sensing radius
- One staff member leads up to 3 GAROOs in a line
- No mapping, floor markers or fixed route
- one button to start
- Up to 5 km/h
- 6-degree max gradient
- Passenger up to 100 kg
- seat width 460 mm, seat height 460-510 mm
- 10-15 km per charge
- about 8 h charging
- Seat belt interlock and LiDAR passenger exit detection with alarm
- Passenger STOP button
- staff joystick at the back
기술 사양
검증됨| 물리 사양 | |
| 무게 | 52 kg |
|---|---|
| 크기 | L 825 mm × W 580 mm |
| 가반하중 | 100 kg |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 5 km/h |
| 작동 환경 | Airports, hospitals, healthcare centres and other large wheelchair-accessible facilities |
| 전원 | |
| 배터리 지속 시간 | 480 Wh |
| 센싱 & 컴퓨팅 | |
| 센서 | LiDAR (Follow-Me tracking, 10 m radius; passenger exit detection), Seat belt sensor, STOP button |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 물리 사양 | |
| 무게 | 52 kg |
|---|---|
| 크기 | L 825 mm × W 580 mm |
| 가반하중 | 100 kg |
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 속도 | 5 km/h |
| 작동 환경 | Airports, hospitals, healthcare centres and other large wheelchair-accessible facilities |
| 전원 | |
| 배터리 지속 시간 | 480 Wh |
| 센싱 & 컴퓨팅 | |
| 센서 | LiDAR (Follow-Me tracking, 10 m radius; passenger exit detection), Seat belt sensor, STOP button |
이미지





이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the GAROO?
GAROO is Doog's robotic wheelchair for airports, hospitals and other large facilities that move passengers or patients every day. It uses the same navigation technology as the THOUZER robotic cart in wheelchair form and works in Follow-Me mode: a LiDAR sensor tracks the target ahead within a 10 m radius, so GAROO follo…
Who makes the GAROO?
The GAROO is made by Doog, a robotics company based in Japan.
How much does the GAROO cost?
Doog has not publicly announced pricing for the GAROO. You can enquire through RobotAIGeek for current pricing.
What is the GAROO used for?
The GAROO is designed for 의료 보조, 도우미, and 운반. It is used in 공항 and 헬스케어 settings.
What is the payload capacity of the GAROO?
The GAROO has a payload capacity of 100 kg.
How much does the GAROO weigh?
The GAROO weighs 52 kg.
How fast is the GAROO?
The GAROO can move at speeds of up to 5 km/h.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- GAROO vs Scewo BRO
- GAROO vs ibot PMD
- GAROO vs Tek RMD M1
- GAROO vs RODEM
- GAROO vs Patient Transfer Bed Robot









