설명
FX40은(는) MAXAGV의 Industrial-Robot입니다. 사내 물류, 리프팅, 자재 취급 용도로 설계되었습니다. 주요 수치: 가반 하중 1500 kg.
The FX40 Omni-directional Side Loader is MAXAGV's automotive-industry AGV for large or small body-side stillages. In transit the load rests on support legs built into the chassis, and dual drive, dual steering lets it travel in any direction - so two loaded FX40s can pass each other in a standard 5 m gangway.\nLike all MAXAGV vehicles it navigates mainly by laser, carries a personal-safety system of emergency stops, safety laser scanners, side edges and bumpers to ISO 3691-4:2020, and runs under the Max software platform with opportunity charging when idle. Options include barcode and RFID readers and MAXAGV's DeZone and Blue Point accessories.
주요 기능
- Side loading
- load rests on chassis support legs in transit
- Dual Drive-Dual Steering, travels in any direction
- Two loaded units pass in a standard 5 m gangway
- Unit load: Pallet - Container - Stillage
- Maximum weight: 1500 kg
- Transfer/lift height: 85 - 7000 mm
- Battery: Wet lead-acid, gel or lithium-ion
- Charging: Opportunity charging, fast charge or battery exchange
- Options: barcode scanner - RFID - DeZone - Blue Point
- Laser navigation as standard
- magnetic, optical or wire guidance where required
- Personal safety system: emergency stops, front/rear safety laser scanners, side edges and bumpers
- ISO 3691-4:2020
- Sonix on-board controller
- managed by the Max software platform
기술 사양
| 물리 사양 | |
| 가반하중 | 1500 kg |
|---|---|
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 작동 환경 | Indoor production, warehouses and distribution centres |
| 센싱 & 컴퓨팅 | |
| 센서 | safety laser scanners, navigation laser, bumpers and safety edges |
| 연결성 | Max software platform (fleet control) |
로봇 포럼
포럼 불러오는 중...
기술 사양
| 물리 사양 | |
| 가반하중 | 1500 kg |
|---|---|
| 이동성 | |
| 이동 방식 | 바퀴형 |
| 작동 환경 | Indoor production, warehouses and distribution centres |
| 센싱 & 컴퓨팅 | |
| 센서 | safety laser scanners, navigation laser, bumpers and safety edges |
| 연결성 | Max software platform (fleet control) |
이미지
martti
martti
martti
martti
martti이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the FX40?
The FX40 Omni-directional Side Loader is MAXAGV's automotive-industry AGV for large or small body-side stillages. In transit the load rests on support legs built into the chassis, and dual drive, dual steering lets it travel in any direction - so two loaded FX40s can pass each other in a standard 5 m gangway.\nLike all…
Who makes the FX40?
The FX40 is made by MAXAGV, a robotics company based in Sweden.
How much does the FX40 cost?
MAXAGV has not publicly announced pricing for the FX40. You can enquire through RobotAIGeek for current pricing.
What is the FX40 used for?
The FX40 is designed for 사내 물류, 리프팅, 자재 취급, and 팔레트 운반. It is used in 창고·물류 and 제조 settings.
What is the payload capacity of the FX40?
The FX40 has a payload capacity of 1,500 kg.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- FX40 vs Yale Relay MO030CR Automated Counterbalanced Stacker
- FX40 vs Yale NDR035EB Robotic Reach Truck
- FX40 vs Yale MC10-15 Robotic Counterbalanced Stacker
- FX40 vs iSAGEBOT Forklift Robot
- FX40 vs Grenzebach FF1200S
