설명
Encobot LAVA은(는) EncoSmart 享刻智能의 Food-Service-Robots입니다. 식품 취급, 조리, Deep-frying fries, chicken and nuggets in fast-food chains, buffets and canteens 용도로 설계되었습니다. 주요 수치: 2023년 출시.
Encobot LAVA is EncoSmart's fully automatic frying workstation for chain fast-food restaurants, canteens and buffets. A kitchen-specific collaborative arm (EncoArm, built on the company's EncoJoint 25 joint modules) works with a self-developed vision module that recognises the type and state of the food, so the robot loads baskets, fries and unloads on its own; the arm also carries weighing and oil-quality sensors, breads evenly and prompts an oil change after seven fry cycles. An order-management system schedules several orders at once with one-touch operation, the cooking system tunes frying from multimodal data and a cloud platform, and production data and quality indicators are logged for traceability. EncoSmart quotes a plate of fries in about two minutes, an average of 40 seconds per order, a peak of 1,732 orders in a day, 190 days of continuous operation, more than 100,000 fault-free fry tasks and 62% lower energy use than conventional equipment. LAVA received Beijing's first food-service licence for an embodied robot in September 2024. By April 2026 it had begun hundred-unit deliveries to Korean fried-chicken shops, completing close to 20,000 chicken and nugget orders, under a 1,000-unit order from an international fast-food chain; a dual-arm version is on the 2026 roadmap.
주요 기능
- Fully automatic frying workstation: loads baskets, fries and unloads without an operator
- Kitchen-specific EncoArm collaborative arm on EncoJoint 25 integrated joint modules
- EncoJoint 25: integrated driver, torque motor, optical encoder, friction brake and harmonic reducer
- dual encoders for closed-loop control
- Self-developed vision module recognises food type and state
- autonomous cooking-time judgement
- Weighing and oil-quality sensors on the arm
- even breading
- oil-change prompt after 7 fry cycles
- Order management with multi-order scheduling and time optimisation
- one-touch operation
- Cooking system tuned from multimodal data and a cloud platform
- Production data and quality indicators logged for management and traceability
- Quoted performance: fries in about 2 minutes
- 40 s per order average
- 1,732 orders in one day
- 190 days of continuous operation
- 100,000+ fault-free fry tasks
- 62% lower energy use
- Scalable from small restaurants to large chains
- dual-arm upgrade planned for 2026
- Beijing's first food-service licence for an embodied robot (September 2024)
기술 사양
검증됨| 이동성 | |
| 이동 방식 | 고정형 |
|---|---|
| 작동 환경 | Indoor, commercial kitchen |
| 액추에이터 | EncoArm collaborative arm with EncoJoint 25 integrated joint modules (friction brake, harmonic reducer) |
| 센싱 & 컴퓨팅 | |
| 센서 | vision module (food recognition), weighing sensor, oil-quality sensor |
| 소프트웨어 / AI | Order management with multi-order scheduling; cloud platform; data logging and traceability |
로봇 포럼
포럼 불러오는 중...
기술 사양
검증됨| 이동성 | |
| 이동 방식 | 고정형 |
|---|---|
| 작동 환경 | Indoor, commercial kitchen |
| 액추에이터 | EncoArm collaborative arm with EncoJoint 25 integrated joint modules (friction brake, harmonic reducer) |
| 센싱 & 컴퓨팅 | |
| 센서 | vision module (food recognition), weighing sensor, oil-quality sensor |
| 소프트웨어 / AI | Order management with multi-order scheduling; cloud platform; data logging and traceability |
이미지





이미지 기여
동영상
로봇 포럼
포럼 불러오는 중...
평가
자주 묻는 질문
What is the Encobot LAVA?
Encobot LAVA is EncoSmart's fully automatic frying workstation for chain fast-food restaurants, canteens and buffets. A kitchen-specific collaborative arm (EncoArm, built on the company's EncoJoint 25 joint modules) works with a self-developed vision module that recognises the type and state of the food, so the robot l…
Who makes the Encobot LAVA?
The Encobot LAVA is made by EncoSmart 享刻智能, a robotics company based in China.
How much does the Encobot LAVA cost?
EncoSmart 享刻智能 has not publicly announced pricing for the Encobot LAVA. You can enquire through RobotAIGeek for current pricing.
What is the Encobot LAVA used for?
The Encobot LAVA is designed for 식품 취급, 조리, and deep-frying fries, chicken and nuggets in fast-food chains, buffets and canteens. It is used in 상업 and 레스토랑·외식 settings.
When was the Encobot LAVA released?
The Encobot LAVA was released in 2023.
유사 로봇과 비교
이 로봇이 가장 가까운 대안들과 어떻게 비교되는지 확인하세요
- Encobot LAVA vs D-Robo
- Encobot LAVA vs AI Food Assembly Robot
- Encobot LAVA vs Collibot
- Encobot LAVA vs xPizza Cube
- Encobot LAVA vs Barista Robot “R Cafe”









